RTW SMTAI: AIM's Dr. Mehran Maalekian Speaks on New Alloys for Harsh Environments


Reading time ( words)

During the recent SMTA International 2017 trade exhibition in Rosemont, Illinois, Dr. Mehran Maalekian, R&D Manager at AIM Solder, speaks with I-Connect007 Managing Editor Andy Shaughnessy about new alloys that are targeted for high-temperature and demanding applications, particularly in harsh environments, where standard lead-free alloy such as SAC will not perform as well.

Watch the Interview Here

Share


Suggested Items

Whitepaper: Electronics Cleanliness Testing

09/11/2018 | Jason Fullerton, Alpha Assembly Solutions
This paper investigates and compares the performance of no-clean liquid wave soldering fluxes using a commercially available localized extraction and cleanliness testing system, and surface insulation resistance (SIR) testing. Find out which test is suitable for your processes.

Strengthening the Joint with a Revolutionary New Low-Temp Solder Paste

09/05/2018 | Patty Goldman, I-Connect007
I-Connect007 Editor Patty Goldman interviews one of Alpha Assembly Solution’s solder process experts, Traian Cucu, who is based at Alpha’s R&D center in New Jersey. Traian, along with Morgana Ribas, have played key roles in the development of Alpha’s innovation new low-temperature solder paste process. He also talks about how this solves many of the defects issues that one would see on a SAC assembly process.

Why Cleaning Still Matters

06/13/2018 | Stephen Las Marias, I-Connect007
Paco Solis, lead investigator at Foresite Inc., speaks with I-Connect007 about why cleaning is more important now, the common pitfalls and misconceptions in cleaning, and strategies to consider to ensure reliable PCB assemblies.



Copyright © 2018 I-Connect007. All rights reserved.