AWE: Introducing the Augmented World Expo


Reading time ( words)

Dan_Fig4.jpgSo when we talk about XR, remember that this includes virtual reality (totally virtual world), augmented reality (inserting a virtual world into and overlaying real world reality), and mixed reality (which is a combination of these as well as other real or fictional universes). All are now falling into the XR term. XR can be walking through a 3D re-creation of ancient Rome, it can be used to play the next generation of Pokémon Go searching for a virtual being in the live world, or it can be using a holographic image and remote control of robotic surgical equipment, perhaps connected by a different megatrend—the upcoming 5G—to eliminate lag and allow a surgeon in one part of the world to operate with great precision on a patient half a world away.

Dan_Fig5.jpg

It can be used to control a military weapon on the attack from a focused control center or it can be used to direct a troubleshooting session directed by a leading expert on the device or system needing repair or calibration, even though that expert is far away. 

Dan_Fig2.jpgFor those of you who have watched the ‘90s sci-fi favorite “Star Trek, Next Generation,” you know the vision of what is possible: the Holodeck. The Holodeck was a prediction of what could be accomplished in the next 200 years. In fact, in less than 30 years some of the basic technology pictured, such as advanced computing power, has already been eclipsed. I predict that the Holodeck will exist and that it will not take anywhere near another 150 years; in fact, some of it is happening now.

Over the next week we will cover some of the presentations, demonstrations, amazing new product and idea announcements, as well as actual demonstrations we saw at AWE. We will look into the rapidly approaching future as seen at perhaps the most visionary and awe-inspiring event I have attended in my over-half-a-century involvement in the high-tech industry. The AWE event not only focuses on XR it seems to be a hub that ties together many of the upcoming megatrends and rapidly advancing technology that will be commonplace in the mid-21st century.

Share

Print


Suggested Items

Conventional Exposing: Direct Imaging Solder Mask

07/04/2019 | Nikolaus Schubkegel
When you compare direct imaging of solder mask with contact exposure of solder mask, the positive aspects and the advantages are clear. Without a doubt, direct imaging shortens the throughput time and eliminates artwork production. It also eliminates the costly measurement of the panels and manufacturing of artwork with different scaling factors.

Kelvin Characterization to Accurately Predict Copper Thickness

07/01/2019 | Article by Brandon Sherrieb, Integrated Test Corporation
A few years ago at Integrated Test Corporation, we found that the reaction plan for void fallout at electrical test was ineffective and not standardized. Like many PCB manufacturing facilities (including a Sanmina shop that I used to work at), the reaction plan consisted of cross section analysis to determine the void type.

IPC’s PCB Tech Trends Study Highlights Issues Impacting Fabricators

06/11/2019 | Michael Carano, RBP Chemical Technology
The 2018 survey results indicated the need for speed and low loss as critical functions of the materials chosen. This is the digital age, and with the Internet of Things, virtual and augmented reality, vehicle-to-vehicle communication, etc., the need for low-loss and ultra-low-loss materials continues to grow as a percentage of circuit boards fabricated.



Copyright © 2019 I-Connect007. All rights reserved.