NASA, Partners, Advance In-Space Assembly Robotics
July 10, 2018 | NASAEstimated reading time: 1 minute
A robotic arm moving a solar array up and down along a space structure, and a robotic hand and jigging system autonomously building truss segments – sounds like a scene from a science fiction movie, but it’s just another day in the office for NASA engineers.
This week marked the last in a series of ground tests demonstrating the capabilities of the Tendon Actuated Lightweight In-Space MANipulator (TALISMAN) robotic arm; the Strut Assembly, Manufacturing, Utility & Robotic Aid (SAMURAI); and the NASA INtelligent Jigging and Assembly Robot (NINJAR) components of the Commercial Infrastructure for Robotic Assembly and Services (CIRAS) project.
Earlier this year, the team of engineers manipulated the newer, longer arm back and forth from folded to extended positions to demonstrate that it is fully operational, then they showed it could pull a truss out from being stowed in a compartment. In this demonstration, the TALISMAN arm was used to move a solar array from one truss section to another and to install the array.
SAMURAI, the robotic hand that passes truss parts, and NINJAR, the jigging robot that holds the pieces in place while they are fastened, have similarly been put to the test this year. The team first used a remote control to operate the two robots and assemble truss segments. This most recent test accomplished an autonomous truss build, using only code and no remote control.
CIRAS is a part of the In-Space Robotic Manufacturing and Assembly (IRMA) project portfolio, managed by NASA’s Technology Demonstration Missions Program and sponsored by NASA’s Space Technology Mission Directorate.
The CIRAS team includes prime contractor Northrop Grumman, supported by its subsidiary, Space Logistics, LLC; NASA’s Langley Research Center in Hampton, Virginia; NASA’s Glenn Research Center in Cleveland, Ohio; NASA’s Goddard Space Flight Center in Greenbelt, Maryland; and the U.S. Naval Research Laboratory in Washington, D.C. Phase 1 of the CIRAS project will end later this year. Northrop Grumman and Langley recently submitted a proposal for a Phase 2 contract to demonstrate these same capabilities on orbit.
Suggested Items
New KAGA ELECTRONICS Factory Under Construction in Mexico Selected for METI’s Project
03/29/2024 | KAGA ELECTRONICSKAGA ELECTRONICS CO., LTD. hereby announces that its new factory construction project in Mexico, aimed at strengthening and expanding its EMS production base, has been selected for the Indo-Pacific and Central-South America Regional Supply Chain Involvement Support Project promoted by the Ministry of Economy, Trade and Industry (METI), and that the maximum subsidy of 100 million yen has been approved.
Reducing Nitrogen Consumption in Convection Soldering with Rehm Thermal Systems' Patented Mechatronic Curtain
03/28/2024 | Rehm Thermal SystemsCurrent developments indicate a need for larger throughput heights due to the trend towards e-mobility, which in turn increases nitrogen consumption for process inertization. Rehm Thermal Systems responds to this issue with an innovative solution: the mechatronic curtain.
Europlacer Announces Introductory Promotions for 2024 IPC APEX EXPO
03/27/2024 | EuroplacerEuroplacer, a leading provider of SMT assembly solutions, is excited to announce special introductory promotions for its latest products at the upcoming 2024 IPC APEX EXPO, scheduled to take place April 9-11, 2024 at the Anaheim Convention Center in California.
ITW EAE Wins New Product Introduction Award for Electrovert® Wave Soldering Machine Deep Wave
03/26/2024 | ITW EAEITW EAE is proud to announce that it has earned a 2024 New Product Introduction (NPI) Award for Electrovert’s Deep Wave option for wave soldering machines. This new, innovative system provides the ability to pump up to a 20 mm wave height.
Green Circuits Unveils Innovative Stacked Capacitors Assembly Process
03/21/2024 | Green CircuitsGreen Circuits, a full-service Electronics Manufacturing Services (EMS) partner to leading OEMs, today announced a groundbreaking advancement in process engineering with the successful implementation of an innovative assembly technique for stacked capacitors.