ITEQ Launches New FR-4 Products for Antenna, LNB Applications
October 18, 2018 | ITEQ CorporationEstimated reading time: 2 minutes
ITEQ Corporation, a Taiwan-based manufacturer of copper-clad laminates, has launched its new IT-8338A and IT-8350A products for use in antenna and LNB applications.
The IT-8338A, with a nominal dielectric constant of 3.38 ±0.04 and a dissipation factor of 0.0038 @ 10 GHz, is intended for LNB and antenna applications.
The IT-8350A, with a nominal dielectric constant of 3.50 ±0.04 and a dissipation factor of 0.004 @ 10 GHz, is the next-generation product for antenna applications.
The products are based on thermoset systems with Tg of 185°C and Td higher than 360°C. These FR-4 products deliver the best cost/performance ratio on the market.
They also offer excellent dimensional stability as a result of their thermoset make-up. Other features include:
- very stable DK/Df with temperature and humidity: TCDK is ~35 ppm/°C.
- immunity to oxidation and issues related to thermal aging that are common with the incumbent products.
- full prepreg offering is available.
- These products are highly suitable for hybrids and also offer the ability to make pure package high layer-count boards due to a full prepreg offering. The fabrication process is much simpler and more user-friendly compared to the incumbent products, and offers higher yields, better drillability, and superior registration, all at a lower cost of ownership.
- RTF and HTE copper options are standard and Rz2 and Rz1 (surface roughness <2 and <1 micrometer, respectively) copper options are also available. One major advantage with these products is the option to use very low profile (VLP) copper for reduced insertion loss and PIM.
The laminate offering includes 20-, 30-, and 60-mil thick laminates as well as optional thinner laminates as required for multilayer applications.
These products will be manufactured in ITEQ's facility in Taiwan and distributed globally and are available for sampling and building test vehicles with customers.
About ITEQ Corporation
Based in Hsinchu, Taiwan since its founding in 1997, ITEQ Corporation is a global leader in the development and manufacture of copper clad laminate materials used for printed circuit boards (PCBs). The company has always been committed to developing the highest quality and most reliable laminate material products, through dedicated and focused cutting-edge research and development and state-of-the-art manufacturing facilities and methods. ITEQ has grown to become one of the largest manufacturers of copper clad laminates and its products are used for advanced multilayer printed circuit boards that go into a wide range of applications, including automotive, aerospace, servers, storage, mobile phones, communications, and other electronic equipment. For more information about ITEQ please click here.
Suggested Items
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources: