Communication and Information: Two Keys to Success
May 21, 2019 | Nolan Johnson, I-Connect007Estimated reading time: 4 minutes
Nolan Johnson and Duane Benson, an I-Connect007 columnist and a representative from Milwaukee Electronics, discuss how assemblers can help their customers through submitting and maintaining accurate information, and engaging in open communication early and often about the highly important bill of materials (BOM).
Nolan Johnson: Duane, can you kick this off with a quick description about Milwaukee Electronics, what they do, and what your role is?
Duane Benson: Milwaukee Electronics is a fullservice contract manufacturer celebrating our 65th anniversary in business this year. And by “full service,” I mean that while we are primarily a contract manufacturer and EMS service, we also have custom design engineering in the corporate office. We also do layout with our San Diego PCB division, and we have prototype and on-demand small and limited quantity manufacturing in our Screaming Circuits division.
Screaming Circuits started to turn manufacturing on its head in 2003. We started with prototypes but are now building on-demand manufacturing, end-product prototypes, and mid-volume. We build items that go into outer space, deep underwater, and pretty much anything in between.
Johnson: So, there’s no real specialty for the ideal type of customer; you talk to everybody.
Benson: Right. Especially with Screaming Circuits, we specialize in a phase of the design and manufacturing cycle—not in a specific industry. Once the engineer hits save in that CAD software for the last time, we specialize in what happens next.
Johnson: Just to clarify, is that statement just for Screaming Circuits or Screaming Circuits and Milwaukee Electronics?
Benson: Screaming Circuits has a broader focus in that we do everything. Milwaukee Electronics has a narrower focus, but not by an awful lot. We work on medical devices in our Portland EMS facility, which is ISO-13485 certified. One of our factories works on military equipment, and all of our factories work on power equipment and communications. We have a very wide set of devices and consumer electronics. We don’t specialize as much as most other manufacturers do.
Johnson: This makes for a very interesting perspective for our conversation today, which will focus on how assemblers can help their customers.
Benson: Obviously, it’s about making the customer’s job easier, which depends on who in the company we are working with. With the scheduled and forecasted volume manufacturing at Milwaukee Electronics, we’re working with purchasing agents. With our Screaming Circuits division, we’re working directly with an engineer, so it’s important to understand what each of those different customers need. For example, purchasing agents need predictability while engineers need flexibility. Overall, the most important thing that we can do to help our customers is good communication.
Johnson: Based on how your company is structured, you may have two different answers to my question—one for the production side and one for the engineering side—so, what’s the one thing that customers can do to connect better with you?
Benson: Well, it’s the same answer for both: good communication, as I mentioned, and accurate information. The vast majority of the problems that we run into—whether they be in our forecasted manufacturing with Milwaukee Electronics or our on-demand manufacturing with Screaming Circuits—fall to communication and information.
At Screaming Circuits, for example, we may get a bill of materials (BOM) that has three-line items that aren’t completely filled out. Now, we have three parts, and we don’t know what they are. We’re not in the engineer’s head, so we can’t guess as to what they are. Or we’ll get three components that aren’t available in stock. We don’t know what to do as a substitute because they haven’t given us one. Later, in the BOM, there are three components that don’t have reference designators, and in the design files, it’s a different version, and they’re missing some of the polarity markings.
We work with a partner for the blank PCB—the foundation of every electronic device—which makes the accuracy of information even more critical. Most of our PCBs are fabricated by Sunstone Circuits. If we are given unclear information from a customer, we may not be able to give the right information to Sunstone. As with the old “telephone game,” each time information goes from one party to another, the risk of misinterpretation increases.
That information is critical, and if you don’t have it right in the first place, you’re going to have a cascading set of problems. We will do our best to solve those problems. We’ll call you to try and figure it out, but we need good communication and information, and we need people to respond quickly, especially in a prototype or on-demand type environment.
All companies face this risk, but we built our business around mitigating that risk. We’ve been working with Sunstone since we started Screaming Circuits, and that level of understanding allows both of us to focus on what each of us is good at. We are so well integrated that the risk of miscommunication is significantly reduced.
To read the full article, which appeared in the May 2019 issue of SMT007 Magazine, click here.
Suggested Items
IPC Bestows Posthumous Hall of Fame Award to Industry Icon Michael Ford
04/18/2024 | IPCIPC honored the late Michael Ford, Aegis Software, for his extraordinary contributions to the global electronics manufacturing industry with the IPC Raymond E. Pritchard Hall of Fame Award at IPC APEX EXPO 2024. IPC’s most prestigious honor, the Hall of Fame Award is given to individuals who have provided exceptional service and advancement to IPC and the electronics industry. Ford, an industry leader and valued IPC volunteer, died suddenly in January 2024.
SEMI Applauds U.S. Chips Act Award for Samsung Electronics Facilities to Strengthen Domestic Semiconductor Supply Chain
04/17/2024 | SEMISEMI, the industry association serving the global electronics design and manufacturing supply chain, applauded the United States Department of Commerce’s announcement of a Preliminary Memorandum of Terms for an award under the CHIPS and Science Act to support the expansion of Samsung Electronics’ presence in Texas and the company’s development and production of leading-edge chips.
Northrop Grumman honors Calumet Electronics with Supplier Excellence Award
04/17/2024 | Calumet ElectronicsNorthrop Grumman Corporation has recognized Calumet Electronics during the company’s 2024 Supplier Excellence Awards for “exceptional performance and unwavering commitment to delivering with excellence.” Calumet is one of 70 suppliers recognized from across the globe. In its award category of “Supplier Strategic Excellence,” Calumet was honored alongside global corporations such as Amazon Web Services, Dell Technologies, and Eaton Corporation.
Ark Electronics Expands Global Manufacturing Factory Network in North America and Europe
04/17/2024 | PRNewswireElectronic Manufacturing Company Ark Electronics recently announced the expansion of its Global Factory Network with the addition of Electronics Manufacturing Service (EMS) capabilities in Mexico and Europe.
Designing Electronics for High Thermal Loads
04/16/2024 | Akber Roy, Rush PCB Inc.Developing proactive thermal management strategies is important in the early stages of the PCB design cycle to minimize costly redesign iterations. Here, I delve into key aspects of electronic design that hold particular relevance for managing heat in electronic systems. Each of these considerations plays a pivotal role in enhancing the reliability and performance of the overall system.