DARPA Announces ERI Summit 2019 Workshops
June 3, 2019 | DARPAEstimated reading time: 2 minutes
For the second year in a row, DARPA is convening the electronics community to discuss the ambitions and achievements of its five-year, upwards of $1.5 billion investment in U.S. microelectronics advancement. Attendees at the second annual Electronics Resurgence Initiative (ERI) Summit – being held July 15-17 in Detroit, Michigan – will hear from commercial and defense leaders as they share their insights on the domestic semiconductor industry and the applications driving next-generation electronics. The Summit will close on July 17 with 11 public workshops designed to demonstrate program accomplishments, shape future areas of research, and provide insights into working with DARPA as well as transitioning technologies to use.
“Continued collaboration across industry, defense, and academia is critical to creating the next wave of microelectronics innovation,” said Dr. Mark Rosker, director of DARPA’s Microsystems Technology Office (MTO). “Last year’s Summit allowed these groups to come together and collectively work towards creating a more specialized, secure, heavily automated, and DoD-available electronics industry. This collaboration contributed to the formation of six new DARPA programs. With this year’s expanded roster of workshops, we are again asking the community to share their perspectives, provide guidance, and foster the connections that will help define the future of an innovative and competitive domestic electronics enterprise.”
In areas ranging from security and privacy to rapid circuit design, ERI’s programs are already working to address both commercial and manufacturing realities as well as the needs of the defense enterprise. Several “Ongoing Efforts” workshops will provide updates on these active research efforts, including presentations on secure hardware and software architectures for high-risk transactions; trusted-by-design components and their impact on supply chain security; and novel atomic clock architectures. Attendees will also experience live demonstrations of autonomous chip design tools as well as open source IP and verification technology in development on two ERI programs – IDEA and POSH. Both programs are addressing the complexity and cost barriers that have limited the competitive field for circuit design by exploring novel approaches to automated circuit design and IP sharing.
Shaping the future of microelectronics innovation requires research and development across a vast number of technical areas and applications. Several “Emerging Concepts” workshops will explore potential future areas of investment, and will seek input from the community to help define the most critical challenges to address. These workshops will focus on enhanced security for commercial hardware; energy-efficient computing for distributed machine intelligence; and novel approaches to designing and verifying distributed systems. A four-hour workshop will also focus on the challenges facing heterogeneous integration – a critical area of exploration for an emerging wave of alternatives to traditional transistor scaling. The workshop will cover problems associated with dense digital integration and mixing silicon with compound semiconductors, as well as potential solutions and paths forward.
Finally, two “Enhancing Collaboration” workshops will provide guidance to attendees who are new to working with DARPA or are interested in transitioning DARPA-funded inventions out of the lab and into the commercial world. During the “DARPA/MTO Collaboration 101” workshop, Rosker will provide both a history of the agency and information about how to work with DARPA in the future.
The deadline to register for the ERI Summit is Monday, June 24, 2019 at 11:59 PM EST. Registration information as well as a full agenda and workshop descriptions are available at www.eri-summit.com. All attendees must register in advance. Workshop headcount limits will be pre-determined based on attendee interest.
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics
04/24/2024 | I-Connect007 Editorial TeamIn our fast-changing, deeply competitive, and margin-tight industry, factory analytics can be the key to unlocking untapped improvements to guarantee a thriving business. On top of that, electronics manufacturers are facing a tremendous burden to do more with less. If you don't already have a copy of this book, what follows is an excerpt from the introduction chapter of 'The Printed Circuit Assembler’s Guide to... Factory Analytics: Unlocking Efficiency Through Data Insights' to whet your appetite.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Winner of The Science Show Rakett 69 Receives Incap Scholarship
04/24/2024 | IncapThe winner of the Rakett 69 science show, Andri Türkson, who stood out as an electronics enthusiast, received a scholarship from Incap Estonia, along with an internship opportunity in Saaremaa.
Alternative Manufacturing Inc. Awarded QML Requalification to IPC J-STD-001 and IPC-A-610
04/24/2024 | IPCIPC's Validation Services Program has awarded an IPC J-STD-001 and IPC-A-610 Qualified Manufacturers Listing (QML) requalification to Alternative Manufacturing Inc (AMI).