Air Force Selects Single Contractor for Long-Range Standoff Nuclear Weapon
April 21, 2020 | U.S. Air ForceEstimated reading time: 2 minutes
The Air Force announced today plans to continue the Long-Range Standoff Weapon’s development with Raytheon Company as a sole-source contractor. The LRSO cruise missile is a critical element of the Air Force’s on-going nuclear recapitalization efforts.
The Air Force previously awarded two contracts for the LRSO Technology Maturation and Risk (TMRR) phase, one to Raytheon and one to Lockheed Martin, in August 2017.
After an extensive evaluation of contractor programmatic and technical approach during the TMRR’s preliminary design reviews, the Air Force decided to focus on Raytheon’s design.
“Our competitive TMRR phase, which included both Lockheed Martin and Raytheon as the prime contractors, enabled us to select a high-confidence design at this point in the acquisition process,” said Maj. Gen. Shaun Morris, Air Force Nuclear Weapons Center commander and program executive officer for strategic systems.
“And this early off-ramp of a contractor is completely in line with the existing LRSO acquisition strategy, which included periodic reviews to assess contractor designs. Lockheed Martin has been an excellent contractor and partner throughout the TMRR effort and this pivot to Raytheon does not represent a lack of effort or commitment on their part. Lockheed Martin has supported the nuclear enterprise for decades and we continue to value their expertise in sensors and nuclear certification and surety.”
“This is not a down-select per se; instead, we are reframing our relationship with Lockheed Martin to focus on specific technology maturation we believe either has future applicability for the final LRSO design or will reduce overall program risk,” said Elizabeth Thorn, AFNWC’s LRSO system program manager.
Communication is underway with the prime contractors and an orderly closeout process has commenced at the affected Lockheed Martin and supplier offices. In addition, interagency stakeholders have been notified.
The LRSO program office is now developing plans to pivot to a sole-source environment. It is also exploring opportunities to redirect funding to critical areas and potentially move some activities into the TMRR phase currently scheduled for the Engineering and Manufacturing Development phase, including flight tests.
Resource reallocation efforts are underway, in the prime contractor and sub-tier contractor offices, according to Thorn.
“I am confident in the program office’s ability to execute the next phase’s contract negotiations in a single-source environment and maintain schedule and affordability,” Morris said. “We are committed to acquiring an affordable LRSO weapon system and we have exceptional cost and design insight into both contractors’ strategies, due to our progress with the acquisition reviews and the cost-capability trades.”
Morris reiterated the off-ramping of a contractor in the TMRR phase is consistent with the LRSO acquisition strategy and different than Boeing’s decision last year not to bid on the EMD contract for the Ground Based Strategic Deterrent, another critical Air Force nuclear weapon modernization effort.
The LRSO program office, located at Eglin Air Force Base, Florida, is part of AFNWC’s Air Delivered Capabilities Directorate. Headquartered at Kirtland AFB, AFNWC is responsible for synchronizing all aspects of nuclear materiel management on behalf of Air Force Materiel Command, in direct support of Air Force Global Strike Command. The center has more than 1,300 personnel assigned to 18 locations worldwide.
Suggested Items
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Ansys, TSMC Enable a Multiphysics Platform for Optics and Photonics, Addressing Needs of AI, HPC Silicon Systems
04/25/2024 | PRNewswireAnsys announced a collaboration with TSMC on multiphysics software for TSMC's Compact Universal Photonic Engines (COUPE). COUPE is a cutting-edge Silicon Photonics (SiPh) integration system and Co-Packaged Optics platform that mitigates coupling loss while significantly accelerating chip-to-chip and machine-to-machine communication.
Siemens’ Breakthrough Veloce CS Transforms Emulation and Prototyping with Three Novel Products
04/24/2024 | Siemens Digital Industries SoftwareSiemens Digital Industries Software launched the Veloce™ CS hardware-assisted verification and validation system. In a first for the EDA (Electronic Design Automation) industry, Veloce CS incorporates hardware emulation, enterprise prototyping and software prototyping and is built on two highly advanced integrated circuits (ICs) – Siemens’ new, purpose-built Crystal accelerator chip for emulation and the AMD Versal™ Premium VP1902 FPGA adaptive SoC (System-on-a-chip) for enterprise and software prototyping.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.