Chapter 2 Excerpt from the Book ‘Thermal Management: A Fabricator's Perspective’
December 21, 2020 | Anaya Vardya, American Standard CircuitsEstimated reading time: 1 minute
Chapter 2: IMPCBs or MCPCBs
Insulated metal PCBs (IMPCB) or metal-clad PCBs (MCPCB) are a thermal management design that utilizes a layer of solid metal to dissipate the heat generated by the various components on the PCBs. When metal is attached to a PCB, the bonding material can either be thermally conductive but electrically isolative (IMPCBs or MCPCBs), or in the case of RF/microwave circuits, the bonding material may be both electrically and thermally conductive. The reason that RF designers usually have the bonding material thermally and electrically conductive is that they are using this not only as a heat sink but also as part of the ground layer. The design considerations are quite different for these different applications.
This chapter will focus on the IMPCB design considerations, and Chapter 4 will focus on RF thermal management. We will focus on things designers should be discussing with their PCB supplier to ensure manufacturability and a successful product launch. Since the choices, options, and decisions can be extremely complicated, it is critical to engage early and collaborate with the PCB fabricator about the specific design to ensure the most cost-effective solution.
Some of the more common applications of IMPCBs include:
- Power Conversion: Thermal-clad offers a variety of thermal performances, is compatible with mechanical fasteners, and is highly reliable
- LEDs: Using thermal-clad PCBs ensures the lowest possible operating temperatures and maximum brightness, color, and life
- Photovoltaic Energy: Renewable energy to power telecommunications, military camps, residential and commercial structures, and battery charging stations
- Motor Drives: Thermal-clad dielectric choices provide the electrical isolation needed to meet operating parameters and safety agency test requirements
- Solid-State Relays: Thermal-clad offers a very thermally efficient and mechanically robust substrate
- Automotive: The automotive industry uses thermal-clad boards, as they need long term reliability under high operating temperatures coupled with their requirement of effective space utilization
To download The Printed Circuit Designer’s Guide to…Thermal Management: A Fabricator’s Perspective, click here. You can also view other titles in our full library. Check out other books from American Standard Circuits, including The Printed Circuit Designer’s Guide to… Fundamentals of RF/Microwave PCBs and Flex and Rigid-Flex Fundamentals.
Suggested Items
PCBflow Helps Designers Choose Best Manufacturer for the Job
03/28/2024 | Andy Shaughnessy, Design007 MagazineI recently spoke with a few technologists who have first-hand experience with PCBflow: Susan Kayesar, technical product manager with Siemens; Evgeny Makhline, CTO of Nistec, a CEM based in Israel; and Peter Tranitz, senior director of technology solutions and leader of the IPC Design Initiative. They explain how PCBflow functions, from the designer’s and manufacturer’s viewpoint, and how this database helps break down the wall between these stakeholders.
Elementary, Mr. Watson: Ensuring Design Integrity
03/28/2024 | John Watson -- Column: Elementary, Mr. WatsonBack in February, many of us watched the "Big Game." It reminded me of the saying, “It's not how you start that is important, but rather how you finish." It is perfectly okay when you are talking about sports, you get off to a bad first half and need to recover in the second half. However, when it comes to PCB design, this is not a good practice. If things start badly, they usually don't recover. They continue down that same path, costing more money and losing design time.
Arrow Electronics Launches Intelligent Vision Ecosystem
03/27/2024 | BUSINESS WIREArrow Electronics, Inc. is utilizing the onsemi Imager Access System (IAS) module standard for developing intelligent vision solutions for use in robotics, machine vision, commercial cameras and other uses.
Dymax Will Exhibit Light-Cure Solutions for Today’s Electronics at IPC APEX 2024
03/26/2024 | DymaxDymax, a leading manufacturer of rapid and light-curing materials and equipment, will exhibit at the IPC APEX EXPO 2024 in Anaheim, CA, April 9-11.
Synopsys Announces New AI-Driven EDA, IP and Systems Design Solutions At SNUG Silicon Valley
03/25/2024 | PRNewswireSynopsys, Inc. kicked off its annual flagship Synopsys User Group (SNUG) conference in Silicon Valley at the Santa Clara Convention Center with a keynote presentation by Synopsys president and CEO Sassine Ghazi. Ghazi discussed the unprecedented innovation opportunities and challenges that technology R&D teams face in this era of pervasive intelligence.