Teledyne Imaging's Infrared Sensors Launched Aboard the James Webb Space Telescope
December 30, 2021 | TeledyneEstimated reading time: 2 minutes
Teledyne Technologies Incorporated congratulates NASA, the European Space Agency (ESA), and the Canadian Space Agency (CSA) on the successful launch of the James Webb Space Telescope (JWST). Teledyne provided 15 extremely sensitive H2RG infrared detectors that are used in three of the four science instruments of JWST: the Near-Infrared Camera (NIRCam), the Fine Guidance Sensor (FGS), and the Near-Infrared Spectrograph (NIRSpec). Ten Teledyne detectors in NIRCam will study the structure and morphology of the universe. Three Teledyne detectors in FGS will be used to point and stabilize the telescope. Two Teledyne detectors in NIRSpec will reveal information about chemical composition, temperature, and velocity of what JWST observes. Teledyne also provided the SIDECAR ASIC focal plane electronics that operate the H2RG detectors.??
Teledyne is proud to provide most of the detectors for NASA's flagship astronomy missions. JWST's predecessor, the Hubble Space Telescope, uses Teledyne detectors for imaging in ultraviolet, visible, and infrared light. JWST, however, will concentrate solely on infrared imaging and spectroscopy. This is because JWST will explore the very distant universe, for which ultraviolet and visible emissions have been stretched by the expansion of the universe into infrared wavelengths, a process known as redshift. Teledyne's infrared detectors enable JWST to observe the first stars and galaxies, allowing scientists to understand the early evolution of the universe. In 2027, NASA will launch its next flagship astrophysics mission, the Roman Space Telescope, for which Teledyne recently delivered the infrared detectors.??
"Teledyne is extremely proud to have provided the detectors that are the 'eyes' of groundbreaking astronomy and astrophysics missions," said Robert Mehrabian, Chairman, President and Chief Executive Officer of Teledyne. "For decades, scientists have used our ground-based and space-based detectors to look outward to our solar system, to the stars and exoplanets of the Milky Way, and to galaxies millions and billions of light years from Earth. More recently, our detectors have been extensively used to look down upon the Earth, monitoring pollution and greenhouse gas emissions, and enabling environmental science and climatology."??
For example, Teledyne provided imaging detectors for the Advanced Baseline Imager in the U.S. National Oceanic and Atmospheric Administration's Geostationary Operational Environmental Satellites (GOES), and NASA's Orbiting Carbon Observatory-2 (OCO-2). Teledyne sensors are also included in multiple European Union Sentinel satellites, including the anthropogenic CO2 emissions monitoring (CO2M) mission and the Copernicus Hyperspectral Imaging Mission for the Environment (CHIME).??
In addition to imaging sensors, a Teledyne system provides the electricity that operates the Curiosity and Perseverance Mars Rovers; the electrical power is produced by Teledyne's Multi-Mission Radioisotope Thermoelectric Generator (MMRTG).
Suggested Items
Inkjet Solder Mask ‘Has Arrived’
04/10/2024 | Pete Starkey, I-Connect007I was delighted to be invited to attend an interactive webinar entitled “Solder Mask Coating Made Easy with Additive Manufacturing,” hosted by SUSS MicroTec Netherlands in Eindhoven. The webinar was introduced and moderated by André Bodegom, managing director at Adeon Technologies, and the speakers were Mariana Van Dam, senior product manager PCB imaging solutions at AGFA in Belgium; Ashley Steers, sales manager at Electra Polymers in the UK; and Dr. Luca Gautero, product manager at SUSS MicroTec Netherlands.
NetVia Group Acquires Direct Imaging from Mivatek
04/09/2024 | Miva TechnologiesMiva Technologies is pleased to announce NetVia Group, Irving, TX has acquired a new Miva 2400NG Dual Tray Direct Imaging System with 30-micron capabilities for inner, outer and soldermask imaging.
Teledyne to Acquire Adimec
02/13/2024 | TeledyneTeledyne Technologies Incorporated announced that it has entered into an agreement to acquire Adimec Holding B.V. and its subsidiaries.
Real Time with... productronica 2023: MivaTek Global Advances Technology With High-res Imaging System
12/08/2023 | Real Time with...productronicaMivaTek's Brendan Hogan talks about how the company employs Digitally Adaptive Rasterization Technology (DART) in their high-res imaging equipment. He also shares how the blurred line between semiconductors and microelectronics is driving broader application of the imaging process.
Keysight Enables Validation of Arbe 4D Imaging Radar Chipset
11/30/2023 | Keysight Technologies, Inc.Keysight Technologies, Inc. announces that Arbe has selected the E8719A Radar Target Solution (RTS) to test the Arbe 4D imaging radar chipset for automotive applications.