IPC Advanced Packaging Symposium: An Urgent Need to Support Global Efforts
October 13, 2022 | Nolan Johnson, I-Connect007Estimated reading time: 1 minute
After two days of presentations, panel discussions, and impromptu hallway conversation at the IPC Advanced Packaging Symposium, one thing became clear: There is an urgency to support advanced packaging in all regions across the globe.
If the discussion on the opening day established the nature of the capabilities gap that the U.S. and Europe are facing in advanced packaging, the agenda on the second day made it clear just how big the gap is, both strategically and economically. Significant investment is needed.
For example, during the panel discussion with representatives from companies such as Calumet, TTM, and GreenSource Fabrication, it was suggested that an advanced packaging facility will require two orders of magnitude more cleanroom area than a current traditional PCB fab, and that it will likely cost a minimum of times of a traditional PCB fab to construct. A greenfield would be the best approach.
One thing was crystal clear from the presentations and hallway conversations: Advocacy groups (IPC, PCBAA and USPAE) have made real headway with legislators. In his closing remarks, IPC Chief Technologist Matt Kelly said that legislation has been adopting industry language as things move forward. His implication was that legislators and their staff are learning enough from the advocates to begin to understand the issues and use the appropriate terminology.
The symposium, which ran from Oct. 11–12 in Washington, D.C., concluded with what seemed to be a great deal of expanded perspective for those who attended. I think the program succeeded in exposing the urgency and the magnitude of the need to support advanced packaging in all regions of the globe. What needs to happen next is ongoing work to focus the efforts, educate manufacturers and legislators, use government funding wisely, and to look at this as an ongoing process for as much as 10 years.
Suggested Items
Alternative Manufacturing Inc. Awarded QML Requalification to IPC J-STD-001 and IPC-A-610
04/24/2024 | IPCIPC's Validation Services Program has awarded an IPC J-STD-001 and IPC-A-610 Qualified Manufacturers Listing (QML) requalification to Alternative Manufacturing Inc (AMI).
IPC Design Competition Champion Crowned at IPC APEX EXPO 2024
04/24/2024 | IPCAt IPC APEX EXPO 2024 in Anaheim, California, five competitors squared off to determine who was the best of the best at PCB design.
Big Win for Defense Production Act Budget Allocation in FY24 Budget
04/23/2024 | I-Connect007 Editorial TeamOne year ago, President Biden issued a determination that chips and packaging are critical for national security. Since that time, much work has been done to continue the conversation in Washington, elevating the importance of the entire chips value chain, and including printed circuit boards and substrates, without which chips cannot operate.
Real Time with... IPC APEX EXPO 2024: A Conversation with IPC's CEO: New Venue, Sustainability, and More
04/23/2024 | Real Time with...IPC APEX EXPOBarry Matties hosts Dr. John W. Mitchell, CEO of IPC, on the final day of IPC APEX EXPO 2024. They discuss the new venue in Anaheim and broach a range of topics, from traffic and booth experiences to workforce development, sustainability, and the CHIPS Act. And they offer advice for newcomers as IPC looks forward to an even better show experience next year.
Boeing's Janene Stinson Earns IPC Excellence in Education Award at IPC APEX EXPO 2024
04/22/2024 | IPCThe IPC Excellence in Education award was presented to Janene Stinson, Boeing, at IPC APEX EXPO 2024 in Anaheim, California, in recognition of her significant contributions to workforce development and leadership.