Repair Enhancement Program Helps Save Air Force Millions
July 16, 2015 | U.S. Air ForceEstimated reading time: 2 minutes
Deep inside one of the 20th Maintenance Group hangars is a windowless room, where Airmen peer into microscopes and solder electronics as they work to save the 20th Fighter Wing millions of dollars.
It's not a secret testing facility or a special operations training hub, but rather an office with three Airmen who belong to a special group of maintainers. The 20th MXG's Air Force Repair Enhancement Program assesses the efficacy of buying new or repairing broken items in an effort to save the 20th FW money.
Repairs come to the shop either through the supply chain for the Defense Reutilization and Marketing Office, or from the owning work center. The equipment is tested to verify the malfunction before the Airmen research repair and troubleshooting options to determine the most cost-effective solution. After repairing the equipment, it is then retested extensively. When they are confident it is serviceable, the item is returned to the owning agency for use.
"We save the Air Force money and time by fixing just about anything on base," said Tech Sgt. Michael Kelly, the 20th MXG AFREP manager. "Anything from aircraft parts to paper shredders."
By providing repaired equipment back to the unit, AFREP saved the 20th FW $2.03 million in fiscal year 2014 -- money that went back to the wing, Kelly said.
AFREP's savings support 18 squadrons across four groups in the 20th FW, which benefits both the mission and the quality of life on base. In 2014, AFREP savings went to funding the sunshades that cover all 79 jets in the wing's F-16CM Fighting Falcon fleet. Part of those savings also allowed the 20th Force Support Squadron to put rubber on the physical training track, improving the fitness facility available to Airmen.
The AFREP’s work ensures the safety of the Shaw AB pilots, too. In fiscal 2015, just by replacing seven landing gear panel LEDs for the wing, they saved more than $60,000, said Tech. Sgt. Scott Williams, a 20th MXG AFREP technician.
Those repairs effectively provide a safe tarmac for pilots to land on during low-light operations.
"The landing gear panel LEDs may seem like a small fix," Williams said. "But those lights tell the pilot that their plane can land safely and that's huge.”
"The 20th FW benefits from AFREP in three very important ways," said Col. Stephen Jost, the 20th FW commander. "They allow us to be good stewards of our taxpayer dollars, they provide us with agile options to keep our jets mission capable, and they essentially generate revenue that can be spent for unfunded requirements across the wing to help us execute our important mission in the most capable and efficient way possible. I am very proud of our AFREP Airmen and what they do."
Suggested Items
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Wisconsin Expo & Tech Forum
04/18/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Wisconsin Expo & Tech Forum taking place on May 7 at the Four Points by Sheraton | Milwaukee Airport, in Milwaukee, Wisconsin.
Hentec/RPS Publishes an Essential Guide to Selective Soldering Processing Tech Paper
04/17/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, announces that it has published a technical paper describing the critical process parameters that need to be optimized to ensure optimal results and guarantee the utmost in end-product quality.
Empowering Electronics Assembly: Introducing ALPHA Innolot MXE Alloy
04/16/2024 | MacDermid Alpha Electronics SolutionsIn the rapidly evolving electronics industry, where innovation drives progress, MacDermid Alpha Electronics Solutions is committed to setting a new standard. Today, we are pleased to introduce ALPHA Innolot MXE, a revolutionary alloy meticulously engineered to address the critical needs of enhanced reliability and performance in modern electronic assemblies.
New Book on Low-temperature Soldering Now Available
04/17/2024 | I-Connect007I-Connect007 is pleased to announce that The Printed Circuit Assembler’s Guide to… Low-temperature Soldering, Vol. 2, by subject matter experts at MacDermid Alpha Electronics Solutions, is now available for download.
Inkjet Solder Mask ‘Has Arrived’
04/10/2024 | Pete Starkey, I-Connect007I was delighted to be invited to attend an interactive webinar entitled “Solder Mask Coating Made Easy with Additive Manufacturing,” hosted by SUSS MicroTec Netherlands in Eindhoven. The webinar was introduced and moderated by André Bodegom, managing director at Adeon Technologies, and the speakers were Mariana Van Dam, senior product manager PCB imaging solutions at AGFA in Belgium; Ashley Steers, sales manager at Electra Polymers in the UK; and Dr. Luca Gautero, product manager at SUSS MicroTec Netherlands.