Against the Density Wall: Landless Vias Might be the Answer
June 27, 2016 | Happy Holden, PCB Technologist-RetiredEstimated reading time: 1 minute
You may not know about landless vias. This has been a well-kept secret for the last 30 years, possibly because it is not permitted on military boards, and therefore, discouraged in all IPC standards. Consequently, when our Japanese partner, OKI Electric, showed us their landless via boards, we said, “You can’t do that; the vias have to have lands!” They replied, “You’ve been listening to IPC again! Try it out and test it!” So we created a test vehicle and tested thousands of vias with various diameters against numerous annular ring vias. Guess what? They were right! As the annular ring got smaller, the failures occurred earlier until we got to landless, and then they jumped to 10X fewer failures. Not understanding this result, the PhDs of HP labs went to work and came up with an explanation (included in this paper). This was so radical a discovery that HP made the data, explanations and results proprietary and a company secret.
Introduction
I saw my first landless via multilayer while visiting NEC at Toyama, Japan back in 1985.
They were an enormous automated facility making Japanese telecom and mainframe computer boards, kind of like IBM and Western Electric rolled into one. NEC was using the liquid electrophoretic, positive-acting photoresist process with panel-plating. I wouldn’t see another landless via multilayer until our Japanese partner (OKI) introduced it to us in 1988. OKI was using the landless vias to achieve higher density without having to pay the extra costs of finer lines. They knew about the higher reliability that resulted, and they had done their own testing, but were after the higher routing density and it allowed them to route five traces between 0.100 inch PTH centers.
The Electrodeposited-Positive Acting Photoresist
My first introduction to the positive-acting photoresist (+PR) was at Hewlett-Packard’s integrated circuit fabrication facility in Palo Alto, California in 1970. HP used this in the liquid form and it was spin-coated on wafers. The photoresist was supplied by Shipley Company of Newton, Massachusetts. I was further exposed to the +PR after moving to the printed circuit fabrication facility.
Editor's Note: This article originally appeared in the June 2016 issue of The PCB Magazine.
Suggested Items
Alternative Manufacturing Inc. Awarded QML Requalification to IPC J-STD-001 and IPC-A-610
04/24/2024 | IPCIPC's Validation Services Program has awarded an IPC J-STD-001 and IPC-A-610 Qualified Manufacturers Listing (QML) requalification to Alternative Manufacturing Inc (AMI).
IPC Design Competition Champion Crowned at IPC APEX EXPO 2024
04/24/2024 | IPCAt IPC APEX EXPO 2024 in Anaheim, California, five competitors squared off to determine who was the best of the best at PCB design.
Big Win for Defense Production Act Budget Allocation in FY24 Budget
04/23/2024 | I-Connect007 Editorial TeamOne year ago, President Biden issued a determination that chips and packaging are critical for national security. Since that time, much work has been done to continue the conversation in Washington, elevating the importance of the entire chips value chain, and including printed circuit boards and substrates, without which chips cannot operate.
Real Time with... IPC APEX EXPO 2024: A Conversation with IPC's CEO: New Venue, Sustainability, and More
04/23/2024 | Real Time with...IPC APEX EXPOBarry Matties hosts Dr. John W. Mitchell, CEO of IPC, on the final day of IPC APEX EXPO 2024. They discuss the new venue in Anaheim and broach a range of topics, from traffic and booth experiences to workforce development, sustainability, and the CHIPS Act. And they offer advice for newcomers as IPC looks forward to an even better show experience next year.
Boeing's Janene Stinson Earns IPC Excellence in Education Award at IPC APEX EXPO 2024
04/22/2024 | IPCThe IPC Excellence in Education award was presented to Janene Stinson, Boeing, at IPC APEX EXPO 2024 in Anaheim, California, in recognition of her significant contributions to workforce development and leadership.