Goodwinds Composites: Putting a Helicopter on Mars
On July 30, 2020, Nolan Johnson spoke with Leland Holeman and Amelia Cook, the owners of Goodwinds Composites. While Goodwinds may be a small business, they still pack a heavy punch in the carbon fiber fabricating business. Case in point, the NASA Perseverance Mars rover mission, which had just launched as we captured this interview, carries a helicopter (named Ingenuity) in its payload and contains custom parts fabricated by Goodwinds.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
Say what you will about 2020, but it certainly isn’t boring. There’s a lot going on in the PCB world, and there’s something for everyone in this week’s top five picks. And it’s all positive, despite the lingering presence of COVID-19 and its aftereffects.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
This week’s top five is a smattering across the industry. There’s an update on an established vendor and a press release from a startup. Then, we have two columns: one on M&A, and the other on supply chain disruptions. Finally, I highlight an interview from a U.S. food distributor sales manager, shedding light on the similarities of supply chain interruption in all industries. It's quite an assortment, but what they all have in common is that readers found these items compelling.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
The common theme in this week’s Top 5 editor’s picks is “change.” We’re talking change in the form of forwarding process, achieving milestones, evolving, and improving metrics. This week’s picks are not only newsworthy but also captured reader attention based on metrics. If you haven’t read any other news items from the industry this week, I propose these five must-reads.
This Month in Design007 Magazine: When Working Remotely, Cybersecurity Is a Necessity
When we started planning this issue on working remotely, we knew we’d have to speak with Stephen V. Chavez, chairman of the Printed Circuit Engineering Association (PCEA). We recently asked Steph to discuss some of the security measures that his company employs and what his experience has been like since he began working out of his Arizona home office full-time several months ago.
Understanding MIL-PRF-31032, Part 1
Over the course of this series, Anaya Vardya will discuss topics such as MIL-PRF-31032 requirements, the quality plan, responsibilities of the Technical Review Board (TRB), and the testing and reporting requirements for the certified shop into the DLA.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
The USMCA trade agreement was just the tip of the iceberg in news affecting our industry this week. We also saw more young people getting involved in the industry, an HDP User Group webinar on automotive thermal issues, and more questions for our own Happy Holden—this time, on stacked microvia reliability, or the lack thereof.
IPC: Shawn DuBravac and Chris Mitchell on USMCA
On July 1, 2020, the USMCA trade act (United States-Mexico-Canada Act) phased in as a trade agreement guiding economic trade and growth in North America. Nolan Johnson spoke with both Shawn DuBravac, IPC’s chief economist, and Chris Mitchell, IPC’s vice president of global government affairs and an I-Connect007 columnist, about the impact of USMCA on North American electronics manufacturing.
Book Excerpt: Thermal Management With Insulated Metal Substrates, Part 3
The following is an excerpt from Chapter 3 of "The Printed Circuit Designer's Guide to... Thermal Management With Insulated Metal Substrates," written by Ventec International Group’s Didier Mauve and Ian Mayoh. In this free eBook, the authors provide PCB designers with the essential information required to understand the thermal, electrical, and mechanical characteristics of insulated metal substrate laminates.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
Updates on trade shows, conferences, and associations dominated industry news this past week. Some events are returning to a physical venue; others are opting for a virtual version in 2020. Add to that a spate of cross-association cooperative agreements and new programs for career development coming from multiple associations, and you’ve delivered four of my top five picks.
Happy Holden Is Taking Your Questions Now
Happy Holden, the industry icon and “Father of HDI,” is ready to answer your questions! What have you always wanted to ask Happy, but never thought you'd have the chance? Now is your chance! Please take a few minutes to jot down your questions for Happy. A select group of answers will be published in upcoming editions of I-Connect007 magazines and newsletters.
Walt Custer’s EIPC Business Outlook Webinar: ‘You Can’t Sugarcoat This Stuff!’
In normal circumstances, it would have been the time of year for the EIPC Summer Conference, and Walt Custer would have opened the proceedings with his business outlook for the global electronics industry. However, circumstances were far from normal. Pete Starkey discusses some of the takeaways from Custer's global business outlook webinar, organized by EIPC.
SpaceX Manned Mission Promises More Success for Milaero and Electronics Manufacturing
On May 30, 2020, SpaceX became the first non-governmental organization to send human cargo into orbit and to a successful docking rendezvous with the International Space Station (ISS). On June 1, Nolan Johnson spoke with military/aerospace consultant and I-Connect007 columnist Mike Hill about the significance of this mission.
What It Takes to Be a Milaero Supplier, Part 4
The decision to pursue military and aerospace (milaero) certification impacts every facet of the organization, and not every shop is prepared to make this transformation. This is the final article in a four-part series, breaking down what it takes. In Part 4, Anaya Vardya explores what it takes to be a milaero supplier in the area of manufacturing.
IPC's Dr. John Mitchell: Leadership in Times of Crisis
On May 13, Dr. John Mitchell, IPC president and CEO, spoke with Barry Matties and Nolan Johnson in another installment in our series of industry updates. In this interview, Mitchell discussed the challenges of leadership in crisis situations.
What It Takes to Be a Milaero Supplier, Part 3
The decision to pursue military and aerospace (milaero) certification impacts every facet of the organization, and not every shop is prepared to make this transformation. In Part 3, Anaya Vardya explores what it takes to be a milaero supplier in the areas of purchasing and quality.
IPC Europe Shares Technical Education and Standards Awareness
Against a background of COVID-19 uncertainty and unprecedented challenges, but recognizing the vital importance of continuing to educate engineers and share the knowledge and skills required to manufacture boards and assemblies of the highest yields and reliability, the IPC Europe team hosted a technical webinar for the European electronics industry, featuring the expertise of two of I-Connect007’s regular columnists: Mike Carano and Jan Pedersen. Pete Starkey provides an overview.
Accurate Circuit Engineering Staying Ahead of the COVID-19 Curve
On April 16, Andy Shaughnessy spoke with Accurate Circuit Engineering’s James Hofer. James provided an update on the company’s responses to the challenges of fabricating PCBs while much of the country is under COVID-19 quarantine. James explained that he is dedicated to keeping his employees safe and healthy while continuing to meet the needs of his customers, many of whom are medical and military OEMs. He also discussed his current workload, which includes one customer developing a ventilator that can serve four patients at the same time.
SMTA Europe’s Electronics in Harsh Environments Conference and Exhibition: A Taste of Things to Come
SMTA Europe’s Electronics in Harsh Environments Conference has become a must-attend annual event; unfortunately, it also became another casualty of the COVID-19 lockdown. Scheduled to take place in Amsterdam, the Netherlands, from April 21–23, 2020, it has now been postponed until December 1–3. Pete Starkey reports on a preview seminar presented by SMTA Europe.
This Month in SMT007 Magazine: Exclusive Interview With Burt Rutan, Aerospace Legend
If you follow advancements in aerospace technologies and expeditions, then you know the name Burt Rutan. Described by Newsweek as “the man responsible for more innovations in modern aviation than any living engineer,” Rutan is a bold visionary with a passion for the advancement of technology, who has designed 46 aircraft throughout his career. Following his IPC APEX EXPO keynote presentation, Rutan stopped by the I-Connect007 booth and shared his thoughts on a wide variety of topics.
IPC’s Dr. John Mitchell Commends U.S. Manufacturers and Governors
On March 31, Dr. John Mitchell, IPC president and CEO, gave Barry Matties an update on the industry response to COVID-19 since their conversation on March 20. Mitchell provides an overall update on the industry, commending U.S. manufacturers for their proactive responses.
What It Takes to Be a Milaero Supplier, Part 2
The decision to pursue military and aerospace (milaero) certification impacts every facet of the organization, and not every shop is prepared to make this transformation. In Part 2, Anaya Vardya focuses on what it takes to be a milaero supplier in the areas of engineering and CAM.
DOX Electronics Discusses New DoD Cybersecurity Requirements
In this video interview from the show, Managing Editor Nolan Johnson speaks with two DOX Electronics technologists, founder and VP Ken Michael and senior account executive Larry Cohen, about the new government cybersecurity requirements necessary to deliver DoD contracts. Ken and Larry also share their upcoming presentation on business security measures, both digital and physical. If you’re bidding on DoD contracts, you won’t want to miss this video.
IPC APEX EXPO 2020 Attendees Speak: Travis Smith and Mindy Sanchez
"I’m seeing a lot of great manufacturers and different equipment that’s available in the market, as well as new, emerging technologies," said Travis Smith of Ball Aerospace. "I’m learning a lot more about some of IPC’s standards and committees as well. It has been a fantastic week of educating ourselves for manufacturing processes going forward. And the IPC booth has a wealth of information."
2020 EIPC Winter Conference, Day 1
Pete Starkey recaps how the 2020 EIPC Winter Conference, held in mid-February, attracted around 90 delegates from a dozen European countries—as well as a few from North America—to an outstanding learning and networking experience for members of the PCB community. The theme of this year's event was: “The Needs for Next-Generation Electronic Devices and Changes in Fabrication Solutions for PCBs, PCBAs, Materials, and Technologies.”
Catching up With Midstate Electronics
Dan Beaulieu recently sat down with Susan Matteo, Joan Allen, and Gerri Wooten from Midstate Electronics’ sales team to discuss their company, how long they have been in business, the key ingredients to their longevity and success, and how they see the market today in general. Midstate offers everything from multilayer PCBs to flex and rigid-flex circuits and PCB assembly.
Burt Rutan’s Keynote: SpaceShipOne
In this video clip from his presentation, Burt Rutan discusses some of his aircraft’s revolutionary flights that drew the most public attention, including SpaceShipOne, which flew three of the five manned space flights launched by man in 2004. He also explains the benefits of working with Microsoft’s Paul Allen, who agreed to fund SpaceShipOne based on a simple handshake.
I-007e Micro Webinar: Primary Flight Control Case Study on Condensation and Coverage
The seventh episode of the popular webinar series “Coatings Uncoated!” is now available to view. Author of "The Printed Circuit Assembler’s Guide to Conformal Coatings for Harsh Environments" and topic expert Phil Kinner from Electrolube shares highly focused educational information on conformal coating and encapsulation. If you are in the assembly business, an EMS, or responsible for specifying conformal coating and/or encapsulation, then this free series is for you.
What It Takes to Be a Milaero Supplier, Part 1
The decision to pursue military and aerospace (milaero) certification impacts every facet of the organization, and not every shop is prepared to make this transformation. This is the first article in a four-part series, breaking down what it takes in sales and customer service, engineering and CAM, purchasing and quality, and manufacturing. Anaya Vardya starts by exploring sales and customer service.
I-007e Micro Webinars Releases Part 4 in ‘Coatings Uncoated!’ Series
What is creepage, and how does it impact clearance? Can conformal coatings reduce creepage? The fourth episode of the popular webinar series, Coatings Uncoated, is now available to view. Author of The Printed Circuit Assembler’s Guide to Conformal Coatings for Harsh Environments and topic expert Phil Kinner from Electrolube shares highly focused educational information on conformal coating and encapsulation.
Fresh Thinking on the Logistics of Laminate Distribution
Mark Goodwin, COO of Europe and the Americas for Ventec International Group, sits down with Barry Matties to explain his approach to supply chain management, efficient distribution, and maintaining definitive product identity at every stage.
Meet John Watson, I-Connect007 Columnist
Meet John Watson, CID, one of our newest I-Connect007 columnists! John has been in the electronics industry for 40 years, with 20 of them being in PCB design, and is now a senior PCB engineer for Legrand Corporation. Read "Elementary, Mr. Watson" in Design007 Week Newsletter.
The World of PCBs: Anything But Boring
Andy Shaughnessy had the chance to catch up with Megan Teta, CID+, product manager of design and education services at Insulectro. Megan explains why she’s excited to become more involved in training and why the world of PCBs is anything but boring, contrary to popular opinion.
UV-curable Materials and Conformal Coatings
Pete Starkey and Phil Kinner, global business and technical director, coatings division, Electrolube, discuss the characteristics and benefits of the company’s new UV-cured conformal coatings. Phil also describes the development of coatings for critical avionics applications and Electrolube’s collaboration with the U.K. National Physical Laboratory to establish a new condensation test.
Designing for Complex PCBs
The I-Connect007 editorial team sat down with Freedom CAD’s Scott Miller to talk about the industry’s demand for more increasingly complex PCBs, and the challenges this presents. They also discuss Freedom CAD’s in-house training programs, the company’s recent book authored by Scott, and why communication is such an important tool in a PCB designer’s toolbox.
André Bodegom on European Challenges, Automation, and Automotive
Editor Pete Starkey speaks with André Bodegom, managing director for Adeon Technologies in the Netherlands, about changes he has seen over the years in major industry sectors, challenges in the European market, and other areas of growth.
Future Trends in Flying Probe Testing
Peter Brandt, director of sales for Europe and Japan at atg, sits down with Pete Starkey and Barry Matties, gives his views on market requirements and testing technologies, and explains how flying probe testing is becoming the industry standard at all levels of production—and in many cases, the only practicable solution.
University Rover Challenge Tests Student Teams
Jose Antelo, Luis Toledo, and Francisco Fernandez, members of the California State University (CSU) Fullerton Rover Challenge team, are working on building a competitive robotic platform to compete with other universities in a competition hosted by The Mars Society known as The University Rover Challenge.
Meet Alfred Macha, SMT007 Columnist
Meet Alfred Macha, one of our SMT007 columnists! Macha’s columns concentrate on process validation, supply chain management, quality management systems, government contracts, FDA regulations, process controls, and more. Alfred Macha brings 20 years of senior leadership roles in quality and operations management working for Sanmina, DDi (now TTM Technologies), Anaren (now TTM Technologies), and HEI Microelectronics.
Is Your EMS Partner Up to Speed With WEEE 'Open Scope?'
E-waste encompasses a myriad of "unseen" metals, semi-metals, and chemical compounds that are found inside circuit boards, wires, and electrical connections. If not handled correctly, chemicals—such as cadmium, barium, lithium, lead, mercury, and beryllium—can present a significant health risk through direct contact, the inhalation of toxic fumes, or the build-up of toxins in water, soil, and food products.
Prototron Receives MIL-31032 and AS9100 Certifications
Kim O’Neil, general manager of Prototron Circuits in Tucson, Arizona, discusses the company’s recent MIL-31032 certification and how this experience prepared them for the AS9100 certification. He also explained why auditing is a good thing for any company’s processes and highlighted some of the areas that the auditors inspected.
SMTAI 2019: To the Moon and Beyond
W. Michael Hawes, D.Sc., gave a great keynote at SMTAI 2019 titled, “To the Moon! Orion's Next Giant Leap Into Deep Space.” Dr. Mike Hawes is currently the VP for human space exploration and the Orion Program manager for Lockheed Martin. Barry Matties spoke with him afterward to discuss the technology innovations that empower the next-generation spacecraft to take astronauts to explore farther than humankind has ever ventured.
SMTAI 2019: Company Updates and Future J-STD-001 Changes
Nolan Johnson speaks with Graham Naisbitt, chairman and CEO of Gen3 Systems, and Andy Naisbitt, operations director, about how they just signed an agreement with a new distributor. Graham also discussed upcoming J-STD-001 changes and Gen3's shift to a more consultative customer model.
How to Dismantle a Nuclear Bomb
How do weapons inspectors verify that a nuclear bomb has been dismantled? An unsettling answer is: They don’t, for the most part. When countries sign arms reduction pacts, they do not typically grant inspectors complete access to their nuclear technologies, for fear of giving away military secrets.
IPC Panel on Bottom-terminated Components
During the IPC Summer Meetings in Raleigh, North Carolina, I sat down with Tom Rovere, a materials and process engineer at Lockheed Martin in Owego, New York. We explored a panel discussion on bottom-terminated components (BTCs) that Tom participated in as well as the challenges and issues related to BTCs and the important role that designers play in that process.
Additive Electronics Conference Set for October 2019
Tara Dunn, president of Omni PCB and I-Connect007 columnist, and Lenora Clark, director of autonomous driving and safety technology at MacDermid Alpha Automotive, discuss what can be expected from the upcoming Additive Electronics Conference in San Jose, California, the impetus and motivation behind the conference, and who can benefit the most from attending.
Meet Dr. Bill Cardoso, SMT007 Columnist
Dr. Bill Cardoso started his first company at age 17 in Brazil, selling it a few years later to work for the U.S. Department of Energy’s Fermi National Accelerator Laboratory, where he led research in nuclear physics to build the equipment that discovered the Higgs Boson (and the 2013 Nobel Prize in Physics). After 10 years at Fermilab, he moved from Chicago to sunny San Diego to start Creative Electron in his garage in 2008.
Meet Mike Hill, I-Connect007 Columnist
Mike Hill has been in the PWB fabrication industry for over 40 years. Throughout his career, he has been a member of IPC and participated in specification writing for both IPC and the military. Within IPC, he has received the President's Award, General Chairmanship, Committee Chairmanship, and many other recognitions. In his columns, Mike will help you better understand the requirements and how-to's for MIL-PRF-31032 certification for PWB fabrication.
The Role of Parylene Conformal Coatings in Next-gen Electronics
Designers and manufacturers of electronics are under pressure to make packages smaller, lighter, and more environmentally friendly, while ensuring that their new technologies perform reliably in their operating environments. This article takes a closer look at Parylene conformal coatings and the role they can play in helping manufacturers address current and future challenges in the electronics industry.
Extending Field of View in Advanced Imaging Systems
The military relies on advanced imaging systems for a number of critical capabilities and applications – from Intelligence, Surveillance, and Reconnaissance (ISR) and situational awareness to weapon sights. These powerful systems enable defense users to capture and analyze visual data, providing key insights both on and off the battlefield.
IPC Reliability Forum Wrap-up With Brook Sandy-Smith
I attended the recent IPC High-Reliability Forum and Microvia Summit in Baltimore, Maryland. The speakers and panelists focused on a variety of topics, but one issue that kept popping up was the failure of some microvias on military and aerospace PCBs. Fortunately, some smart technologists are focusing on determining the cause of these via failures. I asked Brook Sandy-Smith, IPC’s technical education program manager, to give us a quick wrap-up of this event.
26 Meters of Flex!
Barry Matties spoke with Philip Johnston, managing director of Trackwise Designs, about the company’s patented length-unlimited multilayer printed circuits aimed at replacing conventional wire harnesses. Originally created for the aerospace industry, Trackwise has since seen growing interest from a number of different industries. Jake Kelly, managing director and chairman of Viking Test Ltd., also joined the conversation to discuss the importance of having a flexible equipment supplier when dealing with such a unique technology.
IPC High-reliability Forum and Microvia Summit Review, Part I
The IPC High-Reliability Forum and Microvia Summit covered a broad range of topics related to reliability and provided interactive opportunities to share expert knowledge and experience in determining and understanding the causes of failure and selecting the best design rules, materials, processes, and test methods to maximise product reliability.
Crowded Congressional Calendar Affects Industry Priorities
More than five months remain in 2019, but U.S. congressional leaders are already running out of time as they face a long list of must-pass bills before year’s end. Although some of these bills do not affect the electronics industry, some of them do, and the overall agenda does affect the opportunities and risks we face.
A Conversation with Karen McConnell—An Emerging Engineer Program Mentor
IPC’s Emerging Engineer program, launched in 2016, provides early career professionals an opportunity to learn from dedicated industry volunteers who participate in IPC standards development. IPC’s editorial staff had the opportunity to talk with one of those dedicated volunteers, mentor Karen McConnell, Senior Staff Engineer CAD CAM, Northrop Grumman, about why she participates as a mentor in IPC’s Emerging Engineer program.
The Power of Alignment: Celebrating the 50th Anniversary of the First Moon Landing
"We choose to go to the moon in this decade and do the other things, not because they are easy, but because they are hard, because that goal will serve to organize and measure the best of our energies and skills, because that challenge is one that we are willing to accept, one we are unwilling to postpone, and one which we intend to win, and the others, too."
Dissecting the IPC Regional Survey on PCB Technology Trends
Sharon Starr, Denny Fritz, and Mike Carano talk about the global 2018 IPC Technology Trends Report released early this year—the size of the survey, how it was conducted, the general findings, and regional differences. They also shared their takeaways and regional insights, and the industry outlook over the next five to 10 years.
For Climbing Robots, the Sky's the Limit
Robots can drive on the plains and craters of Mars, but what if we could explore cliffs, polar caps and other hard-to-reach places on the Red Planet and beyond? Designed by engineers at NASA's Jet Propulsion Laboratory in Pasadena, California, a four-limbed robot named LEMUR (Limbed Excursion Mechanical Utility Robot) can scale rock walls, gripping with hundreds of tiny fishhooks in each of its 16 fingers and using artificial intelligence (AI) to find its way around obstacles.
Saying Yes to Opportunities: IPC’s Emerging Engineer Program Offers Career Growth for Electronics Industry Newcomers
What makes the IPC Emerging Engineer Program a premier networking and career enriching program? IPC staff spoke to Emerging Engineer Kate Stees, materials and process engineer, Lockheed Martin, about her experience in the program and why she recommends it to other engineers.
Graphene Goes to Space
The experiment aims to test the possibilities of printing graphene inks in space. Graphene inks can be used in the production of batteries, supercapacitors, printed electronics, and more. If researchers are able to demonstrate how these inks work in space, astronauts could potentially print their own devices on the go, or they can repair electronics with graphene ink printers.
AWE 2019: Go XR, Be Awesome
Dan Feinberg attended and covered the recent 2019 Augmented World Expo (AWE) and conference in Santa Clara, California. The event featured the latest developments and technologies in augmented (AR), mixed (MR), virtual (VR), and extended virtual reality (many just call it all XR to make it simple). Here's a wrap-up of the event.
What Electronics Companies Need to Know About Environmental Product Requirements
The task of monitoring and complying with environmental, health and safety (EHS) rules that affect electronics companies and their products requires a watchful eye on all levels of government: local, state, national, and international.
IPC’s PCB Tech Trends Study Highlights Issues Impacting Fabricators
The 2018 survey results indicated the need for speed and low loss as critical functions of the materials chosen. This is the digital age, and with the Internet of Things, virtual and augmented reality, vehicle-to-vehicle communication, etc., the need for low-loss and ultra-low-loss materials continues to grow as a percentage of circuit boards fabricated.
IMPACT Washington, D.C. 2019 Recap: Leaders Call for Action on USMCA Trade Deal
Top executives from electronics companies across the United States were in Washington, D.C., last week to call on the Trump administration and Congress to support policies that will drive the electronics industry’s future growth in North America and worldwide.
NASA Awards Artemis Contract for Lunar Gateway Power, Propulsion
In one of the first steps of the agency’s Artemis lunar exploration plans, NASA announced the selection of Maxar Technologies, formerly SSL, in Westminster, Colorado, to develop and demonstrate power, propulsion and communications capabilities for NASA’s lunar Gateway.
FlexFactor Program Informs, Inspires, Attracts, and Recruits Talent
Barry Matties and Nolan Johnson speak with Brynt Parmeter, Emily McGrath, Clarence Chi, and Mikayla Ridi about the NextFlex program FlexFactor. This initiative aims to help high school and college students see potential futures in the advanced manufacturing sector and combat common misperceptions young people might have about modern-day manufacturing.