Reliable Robotics, Inmarsat Collaborate on Commercial Satellite Communications Solution for Remote Piloted Aircraft
March 9, 2023 | InmarsatEstimated reading time: 2 minutes
Inmarsat has announced a collaboration with Reliable Robotics, a leader in safety-enhancing aircraft automation systems, to support the safe, secure and efficient integration of remotely piloted aircraft systems into the US National Airspace System and airspace worldwide.
Inmarsat’s Velaris satellite communications service provides connectivity between remote pilots and aircraft for airspace access, including voice and digital communication links with air traffic control. By using existing certified airframes and commercial satellite networks, this new operating model can be brought to market quickly, without costly infrastructure, to expand the operational range for Uncrewed Aircraft Systems (UAS).
Automation and remotely piloted aircraft could be key to supporting the future growth of freight volumes and alleviating the pressure on stretched supply chains, particularly for time-sensitive deliveries. Reliable Robotics is driving the industry forward with the automation of cargo aircraft to increase safety, improve efficiency and open up more routes to regional airports. However, automated aircraft technologies must be highly reliable and achieve required global certifications and regulatory safety approvals to gain access to airspace.
Joel Klooster, Senior Vice President of Aircraft Operations and Safety, Inmarsat Aviation, said “Secure and consistent transmission of digital commands, telemetry and voice data is critical to remote aircraft operation, where availability and integrity of the link are essential to the overall performance. We’re proud to play a crucial role in bringing this world-first satcom solution to market with Reliable Robotics.”
Velaris, powered by Inmarsat’s ultra-high reliability ELERA network, will provide a secure command and control (C2) link to seamlessly connect Reliable’s remote pilots to its aircraft fleet with comprehensive coverage for communications. A connection is established using a small onboard satellite terminal and information flows through a private network, allowing the system to scale with demand. The equipment is designed to meet the Federal Aviation Administration (FAA)’s recognised means of compliance and technical standards for airborne avionics.
Myles Goeller, Chief Business Officer at Reliable Robotics, said "We greatly appreciate the time and resources Inmarsat has devoted to tailor a global satellite communications solution to our technical, certification and commercial needs. It is exciting to work with Inmarsat to deploy a robust satcom system that will support the scaling of remotely operated aircraft and allow us to fly almost anywhere."
Reliable Robotics is developing a certifiable system that enables continuous autopilot engagement through all phases of flight, including taxi, takeoff and landing with a remote pilot supervising operations. A satellite-based C2 link between the remote pilot and the aircraft is an integral component. Higher precision navigation, sophisticated flight planning capabilities and more robust flight controls better manage aircraft and environmental conditions and improve safety, reducing the occurrence of common causes of aviation accidents.
Suggested Items
Siemens’ Breakthrough Veloce CS Transforms Emulation and Prototyping with Three Novel Products
04/24/2024 | Siemens Digital Industries SoftwareSiemens Digital Industries Software launched the Veloce™ CS hardware-assisted verification and validation system. In a first for the EDA (Electronic Design Automation) industry, Veloce CS incorporates hardware emulation, enterprise prototyping and software prototyping and is built on two highly advanced integrated circuits (ICs) – Siemens’ new, purpose-built Crystal accelerator chip for emulation and the AMD Versal™ Premium VP1902 FPGA adaptive SoC (System-on-a-chip) for enterprise and software prototyping.
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation are proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia. on their first installation of Taiyo Circuit Automation DP3500 coater.
Vicor Power Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/24/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that Vicor Power has finalized the purchase of a Pulsar solderability testing system.
Lockheed Martin Successfully Transitions Long Range Discrimination Radar To The Missile Defense Agency
04/23/2024 | Lockheed MartinThe Long Range Discrimination Radar (LRDR) at Clear Space Force Station in Clear, Alaska, completed DD250 final acceptance and was officially handed over to the Missile Defense Agency in preparation for an Operational Capability Baseline (OCB) decision and final transition to the Warfighter. In addition, prior to this transition, the system has started Space Domain Awareness data collects for the United States Space Force.
US Department of Defense Selects Intel Foundry for Phase Three of RAMP-C
04/23/2024 | IntelThe U.S. Department of Defense (DoD) has awarded Intel Foundry Phase Three of its Rapid Assured Microelectronics Prototypes - Commercial (RAMP-C) program.