Garry McGuire: Aiming for the Stars
Garry McGuire of the Jacobs Space Exploration Group at Marshall Space Flight Center in Huntsville, Alabama, reflects on the serendipitous moment that led to a leadership role at IPC and the enduring relationships he’s built through his participation in the organization. With the rapid advance of technology constantly pushing the industry forward, Garry urges newcomers to jump in and experience all IPC has to offer.
Bigelow: Bullish on Fab’s Future
Twenty-plus years is a long time to lead a business during a long decline in the industry, but IMI President and CEO Peter Bigelow remains quite confident about the future. The company is in a strong financial position, running well, and looking at new technologies. So, what’s his biggest challenge? It’s not much different than any other manufacturer you talk to, and while he may not have all the answers, he’s clearly got insight to share.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
It’s almost as if upheaval is the new normal. We often describe slow-moving but unstoppable change as moving in “geologic time.” But occasionally–like an earthquake–geology shifts suddenly. Here in my office, tracking the news of the industry, things are moving faster than geologic time, but more slowly than the jolt of an earthquake. The wave seems almost surfable, where before it seemed overwhelming. In this week’s list, we bring news from five different, high-vibration areas in our industry. If you read nothing else this week, these five items will keep you informed.
The Summit View of the Marketplace
Investments, staffing, cybersecurity, and a peek into his crystal ball—John Vaughan, vice president of strategic markets at Summit Interconnect, sits down with Nolan Johnson to talk about it all. Business is good, by the way, thanks to Summit’s portfolio of military contracts, and he has sound advice to offer for smaller shops in the United States, and their real ability to make a difference in PCB fabrication.
The Automated Future of PCB Fabrication
I have always felt that automation has the potential to make a big difference in our PCB industry, especially domestically, where labor is at premium. For the past year, I have been looking for the story of how automation can and will make a significant difference in established PCB shops. I was fortunate enough to find that story in Multicircuits, located in Oshkosh, Wisconsin. Only a few short years ago, this company was considered a “plain vanilla” PCB fabricator holding its own in our industry; now it has suddenly assumed a true leadership position in the industry in terms of capability, technology, operations, and profitability.
Boeing, Shield AI Set to Collaborate on Artificial Intelligence, Autonomy for Defense Programs
Boeing and Shield AI have signed a memorandum of understanding to explore strategic collaboration in the areas of autonomous capabilities and artificial intelligence on current and future defense programs. Shield AI created Hivemind, an artificial intelligence pilot that has flown a variety of aircraft. According to Shield AI, the AI pilot can also enable swarms of drones and aircraft to operate autonomously without GPS, communications or a human pilot in the cockpit.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
I try to not talk about the weather in this space, but this week I feel compelled. I’m based in the Pacific Northwest, and we’re relatively used to it being wet and rainy. But just south of us in California, the state has gone from what I read has been called the driest period in the West in the past 1,200 years to a right proper drenching. This week’s news cycle felt like one of those California-style “atmospheric rivers.” There was so much worthy reporting worthy that I was a bit overwhelmed in making my final selections. Suffice it to say that, this week, there is quite a bit of news that’s worth your time to read.
Curtis Grosskopf: Lasting Connections Fuel Progress
Dieter Bergman IPC Fellowship Award winner Curtis Grosskopf, a senior engineer at IBM, reflects on the evolution of IPC committees and the vital importance of their work, especially in collaboratively creating industry-wide standards to guide the work of professionals in every sector. This commitment to multidisciplinary cooperation is a mindset that should be fostered at the start of every career.
Are You Offering Options in Your Bill of Materials?
In this interview, Saline Lectronics (an Emerald EMS company) President Jason Sciberras talks about PCB designers offering packaging options in the bill of materials. As Jason explains, mil/aero manufacturers like Saline can’t make many changes to a design without getting recertified, so including approved packaging options in the BOM from the start is a great way to go. Are you offering options in your BOM?
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
It’s been a busy week in our industry. We have a duke’s mixture of news and columns in this week’s Editor’s Choice, starting off with some good news for the American electronics manufacturing industry. In his State of the Union speech, President Biden signaled his support for the CHIPS Act and the U.S. electronics industry, and he promised that Washington would put its money where its mouth is this time. Is it going to happen? Don’t bet the rent money.
Time to ‘Finish the Job’ on PCB Funding
In his State of the Union address in early February, President Biden departed from his usual topics about education and the economy to mention the new CHIPS Act, as well as supply chain and infrastructure issues. For perspective on those remarks, Nolan Johnson chats with David Schild, executive director of the Printed Circuit Board Association of America (PCBAA).
Real Time with... IPC APEX EXPO 2023: Taking Our Message to Washington
Nolan Johnson talks with Chris Mitchell, vice president of Global Government Relations at IPC, about key issues IPC is working on today and how you can be involved in advocating for our industry in 2023. Their conversation also covers the CHIPS Act, advanced packaging, and much more.
EIPC Winter Conference 2023: Day 1 Review
The EIPC Winter Conference returned to the Metropolis of Lyon in eastern France this month. In 2018, the venue was Villeurbanne in the Auvergne-Rhône-Alpes region. Five years later the setting was the Groupama Stadium in Décines-Charpieu, and leaders of the European printed circuit community gathered in expectation of a spectacular programme of 16 presentations, a visit to a nuclear power station, and an invaluable networking opportunity. They weren’t disappointed.
A Conversation With ‘The Space Gal’
With multiple advanced degrees in aerospace science, Emily Calandrelli could have had her pick of any project in earth and space science. Instead, she has chosen to use her skills in science policy and communication to break down complex science topics, advocate for women in STEM fields, and bolster enthusiasm for the next generation of scientists through her own Netflix show and an active slate of social media accounts. Emily’s platform is huge, but it's one that she wholeheartedly embraces. In this interview with the I-Connect007 Editorial Team, Emily talks about her unconventional entry into science, what’s ahead for space commerce, advice for industry leaders, and what she really thinks about going into space.
Printed Circuit Boards Have Champions on Capitol Hill
House Resolution 7677 from the 2021/22 Congressional session may have run out of time before the election cycle, but that hasn’t ended the effort to help fund the printed circuit board industry alongside the semiconductor industry. IPC vice president of global government relations, Chris Mitchell, shared this letter, sent to DOD on Wednesday by Reps. Anna Eshoo (D-CA) and Blake Moore (R-UT), which insists DOD must “leverage all available resources, including the use of Title III of the Defense Production Act (DPA), to increase domestic production of PCBs and IC substrates.”
Real Time with... IPC APEX EXPO 2023: Challenges of New Product Development
John Ekis, market segment director, Aerospace and Defense, Rogers Corporation, discusses with Pete Starkey the importance of close applications engineering relationships in understanding and responding to the requirements and challenges of specialist new product development.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
We have new projects in the U.S. Army space programs, research on gold thickness and solderability, a call for papers throughout 2023 from SMTA, an investment in Korean facilities by ASM, and an adjustment in TTM’s assignation with the U.S. DoD. All together, these five must-reads represent the hurtling trajectory that R&D seems to be following in 2023.
TTM Technologies Reports Fiscal Q4, 2022 Results
TTM Technologies, Inc., a leading global manufacturer of technology solutions including engineered systems, radio frequency (RF) components and RF microwave/microelectronic assemblies, and printed circuit boards (PCB), reported results for the fourth quarter and fiscal 2022, which ended on January 2, 2023.
I-Connect007 Editor’s Choice: Five Must-Reads For the Week
It’s Feb. 3, 2023—2/3/23—and now we know the results of yesterday’s Groundhog weather forecast straight from Gobbler’s Knob in Pennsylvania. Punxsutawney Phil says six more weeks of winter. If you’re watching the ongoing ice storms blanketing much of the United States at present, that seems like a safe bet. Also a safe bet is that the most-read news this week is IPC APEX EXPO related. Additionally, this week IPC published its EMS and PCB numbers for December. All told, lots of industry news to read this week.
Don't Blink: The IPC APEX EXPO Time-lapse
It’s a tradition here at I-Connect007 to set up a time-lapse for IPC APEX EXPO. There’s something satisfying, mesmerizing even, to watch the show floor build out and see the moment when the doors open and visitors fill the exhibit hall. Based on what others have said over the years, I know I’m not the only one whose favorite part is when the carpet gets rolled out and the whole character of the exhibition changes. This time lapse starts on the Saturday prior and continues through the Thursday tear-down phase.
A Challenge Facing Aerospace Designers In 2023
As the aerospace industry has been tasked with fitting increasingly complex electronics in existing airframes the demands on PCB substrates have begun to overtask the existing state of the art in PCB fabrication. Recently, I was called in to troubleshoot some reliability problems with a very dense PCB that had components on both sides and required the use of stacked blind vias and buried vias. The usual name for this kind of design is “build-up fabrication,” requiring many trips through the lamination, drilling, and plating operations at a fabricator.
It’s Here: The Launch of IPC Community Magazine
IPC Community Magazine launches today at IPC APEX EXPO 2023, both in digital and print form. It is now widely available for download at no cost. This magazine helps tell the stories of IPC, particularly for IPC members who use and interact with the trade organization. IPC worked closely with I-Connect007 (IPC Publishing Group) to develop the concept for the publication, and asked John W. Mitchell, president and CEO of IPC, to share a few thoughts as he looked at the magazine for the first time in print.
Durability and Cost Benefits Drive Mil-Aero Demand for OCPP
Ceramic packages were, for many years, the option of choice for semiconductor prototype assembly, particularly in military-aerospace applications. They can withstand high temperatures and can be hermetically sealed. However, they can be costly and, while they allow for rapid assembly of first samples, the final product is typically a plastic package, so the ceramic prototype doesn’t offer an accurate representation. This need for a better, more viable alternative to ceramic was one of the catalysts that gave rise to open-cavity plastic packaging (OCPP).
US, Japan Sign Space Collaboration Agreement at NASA Headquarters
During an event hosted by NASA Administrator Bill Nelson and Deputy Administrator Pam Melroy at the agency's Headquarters in Washington Friday, representatives from the United States and Japan gathered to sign an agreement that builds on a long history of collaboration in space exploration between the two nations. Known as the "Framework Agreement Between the Government of Japan and the Government of the United States of America for Cooperation in Space Exploration and Use of Outer Space, Including the Moon and Other Celestial Bodies, For Peaceful Purposes," this pact recognizes a mutual interest in peaceful exploration.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
The youngsters are back in school, and we’re all back to work. The water is back on for most of us in Atlanta; when temps dropped down to 8 degrees Fahrenheit, our pipes started bursting left and right. After a Christmas dinner with no water, I have a new appreciation for H2O. It’s been a busy week, and we published a variety of articles, columns, and news items. In this week’s top five, we have news about the market in Southeast Asia, a look at what the CHIPS Act really entails, a deep dive into CMMC, and a peek at how printed electronics developers are using flexible circuit concepts to facilitate PEC. We also say goodbye to a Top Gun PCB designer who left us way too soon.
Ventec: Contextualizing the CHIPS Act
Nolan Johnson hears from Alun Morgan, Technology Ambassador at Ventec, and Mark Goodwin, Ventec’s COO, about the benefits and risks posed by new PCB-oriented legislation in the U.S. and Europe. Faced with a rapidly consolidating industry, especially in the face of mounting pressure from the Russia-fueled energy crisis, government intervention is a welcome prospect—as long as legislators are committed to addressing the full scope of the issue, including the supply chain’s migration to Asia. Ventec is hopeful that, having been called on to educate government officials on the challenges facing the industry, they will help spur future legislative changes that will protect and grow the industry’s interests.
Designing a Sustainable Future
While it may be traditionally considered a PCB fab and assembly show, IPC APEX EXPO is quickly becoming a destination for PCB designers and design engineers. Flipping through this year’s schedule, I counted 15 Professional Development and Technical Conference classes that focus on PCB design, as well as several fabrication classes that many of you should probably take. I checked in with Carlos Plaza, IPC’s senior director of educational development, to discuss the organization’s drive to present more PCB design curriculum at the upcoming show and how the show can give designers the tools they need to overcome the many challenges currently facing the industry.
Essemtec: Manufacturing Moves In-house
Pete Starkey talks with Kevin Domancich at Essemtec at electronica 2022 about the company integration within Nano Dimension and how the two companies have pioneered an exciting new end-to-end manufacturing solution that helps customers speed up production, cut costs, and keep their proprietary materials secure. In a world where time to market has become a priority consideration, this universal system has the potential to revolutionize the industry.
ICT Christmas Seminar 2022: The Caliber of a ‘World Cup’ Event
Regardless of the potential distraction of the international football match between England and Wales in the World Cup competition, an enthusiastic crowd of PCB fans gathered in Meriden UK for the Institute of Circuit Technology Christmas Seminar, an eagerly-awaited networking opportunity that included a face-to-face industry welcome event and an outstanding technical programme. Guest speakers highlighted new technology in selective solder nozzles, flexible circuits, industry cooperation, and a greener future by recycling PCBs.
Polar Instruments: Simulating PCB Potentialities
Nolan Johnson checks in with Polar’s Martyn Gaudion on the evolving needs of global PCB manufacturing markets in a post-pandemic world, where generating accurate PCB specification documentation is essential to successfully navigating today's rampant supply chain constraints. Polar has positioned itself to meet these needs through agile software product developments that allow OEMs and fabricators to simulate material interactions and end-product specifications, including in-demand features like a comprehensive "structure view" that allows users to visualize all the transmission lines on a given a PCB. Though keeping pace with the demands of a rapidly growing industry has been challenging, Polar's commitment to innovation has kept its software suite ahead of the curve.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
Normally, the holiday season is a slow(ish) news time, but this year just feels different. My opinion is that the technology industry banked up a whole bunch of innovations and new products during the pandemic disruptions, which are coming to market as quickly as possible. The November/December news is full of technology discussion, as my selections this week clearly demonstrate.
An Opportunity to Give Thanks
I-Connect007 wants to take this opportunity to give thanks to so many people that make "the magic" happen day in and day out. Thanksgiving is a time, of course, to give thanks for the bounty that we enjoy, and that couldn't be truer each day for the support we receive in editorial, advertising, and marketing of our daily, weekly, and monthly publications. It's a pleasure to contribute to the industry—and to receive contributions. Read our Thanksgiving message and then enjoy your turkey day.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
The industry news cycle seems to be picking up speed lately. Of course, 30 days into the quarter is about when public companies announce their results, and in the midst of this worldwide financial situation, we’ve got all eyes on anything coming out from our counterparts in the industry. I’ve noticed that global corporate results (Nan Ya PCB and TTM, in particular) do seem to be on everyone’s radar. In addition to financial news, trade shows are popping back up around the world—Europe, India, and a special report from editor Andy Shaughnessy, who took his own road trip to Raleigh, reporting on PCB Carolina, which had its own heyday this year.
PCB Carolina Breaks Attendance Record
PCB Carolina has been growing consistently for the past decade, and this year the show reached a milestone: more than 1,000 attendees. Yesterday, the show was the busiest I’ve ever seen it; I almost had to park off the NC State University campus. Fortunately, I’m an expert at “the parking lot game.” I waited until a guy was leaving and then I sniped his spot. Bam!
IPC to Unveil New Member Magazine, ‘IPC Community’ at IPC APEX EXPO 2023
IPC, in partnership with IPC Publishing Group (I-Connect007) will unveil an exciting new publication, "IPC Community," at IPC APEX EXPO 2023, as a continuation of its commitment to better serve the electronics industry and provide additional value for IPC members.
EIPC Technical Snapshot: ‘Tremendous Uncertainty’ in Global PCB Marketplace
For the past two years, EIPC’s Technical Snapshot series has kept us extremely well-informed on developments in printed circuit materials and manufacturing technologies. But what is currently happening in the global PCB market, and how is Europe and the rest of the world affected by the current world situation? The 19th chapter (coincidentally on Oct. 19) in the series gave us a privileged opportunity to find out, as two leading industry analysts presented their observations and opinions in a webinar introduced and moderated by EIPC technical director Tarja Rapala-Virtanen.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
Where did the year go? I can’t believe we’re planning our January and February issues now. It was 84 degrees most of last week in Atlanta, and now it’s 31. I guess I should take my Hawaiian shirts out of rotation! This week we have quite a variety of articles for you. It’s officially show time and the industry is back in business in a major way. We have some news coming out of last week’s advanced packaging event in Washington, D.C., and an article about navigating SMTA International, which opens on Halloween this year in Minneapolis. We have a great column on avoiding EMI with good routing strategies, and an article on electrically conductive inks. To top it off, I-Connect007 has published a new book, written by Matt Stevenson of Sunstone Circuits, that posits a new “design for”: Designing for Reality. If you’re a designer, isn’t designing for reality what it’s all about?
EMA Helps Ease Designers’ Supply Chain Woes
Supply chain issues are continuing to cause disruptions in our industry, though lead times have dropped from astronomical to merely troublesome. In this interview, Chris Banton, EMA Design Automation’s director of marketing, explains how Cadence’s software has evolved as designers’ needs have changed in the past few turbulent years, including providing designers with component availability data early in the process.
PCB Legislative Update: HR 7677
Electronic industry association leaders like IPC, PCBAA, and USPAE have been trekking to Capitol Hill almost weekly this year to reinforce the dire state of the industry and seek additional co-sponsors for HR 7677, a bill supporting the American printed circuit board industry. However, with only 78 days until the end of the 117th Congress, it is not likely that anything will move by the end of this session.
IPC Advanced Packaging Symposium: An Urgent Need to Support Global Efforts
After two days of presentations, panel discussions, and impromptu hallway conversation at the IPC Advanced Packaging Symposium, one thing became clear: There is an urgency to support advanced packaging in all regions across the globe. The symposium, Oct. 11-12 in Washington, D.C., concluded with what seemed to be a great deal of expanded perspective for those who attended.
IPC Symposium: U.S. Must Address Critical Gaps in Advanced Packaging Needs
There is a significant capability gap in advanced substrate packaging in North America, forcing all semiconductors to be packaged in Asia and leaving North America at risk in its supply chain. This was a common theme during a two-day IPC Advanced Packaging Symposium, which launched yesterday at the Kimpton Monaco hotel in Washington, D.C.
Viasat, Inmarsat Confident their Combination Benefits Consumers
Viasat Inc. and Inmarsat remain committed to working with the UK’s Competition and Markets Authority (CMA) to demonstrate how their planned transaction will benefit airline, passenger, and enterprise users of In-Flight Connectivity (IFC) in aviation businesses.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
This week, our five must-reads include the IPC report on the EMS industry and a report on ICs for the automotive market. Add to that Lockheed’s highest powered DoD laser yet, IPC’s APEX keynote announcement, and—for you conference and expo junkies—a calendar of upcoming industry events. I can’t help but notice that much of our news is about, well, something new. In this case, my editor’s picks for the week capture new technology, new perspectives, new ways to communicate content, and new developments that we can expect to see in our future daily life. To borrow a phrase from the TV show “Firefly,” everything is “shiny” this week. I will be at PCB West, the IPC Advanced Packaging symposium, SMTA International, and electronica. If you see me, say hello, and share something cool about the part of the industry you’re in.
Michael Carano: A Focus on Process Control, Part 2
In this second half of our conversation, Michael Carano discusses some of the metrics that fabricators need to consider before investing in new processes, especially process control technologies, and some of the challenges board shops face updating brownfield sites.
The New World Order of JIC
The great business thought leader Margaret Heffernan commented that we are changing from just-in-time (JIT) to just-in-case (JIC). As we’ve worked our way through the issues of the past two years, the world is changing from a complicated to a complex system, and we must be prepared to face the challenges it brings. To survive today, we need the JIC mentality. We must be prepared for the unexpected. No longer can we rely on cycles and patterns to predict the future, or what we might be able to handle based on what that future brings. Now we must prepare for the unexpected. We must be flexible and able to adapt to whatever comes our way.
A Focus on Process Control, Part 1
Michael Carano is a noted subject matter expert with respect to process control, electroplating and metallization technology, surface finishing, and reliability. So, it was only natural that we sat down to talk about mechanizing an existing facility given today’s fickle environment. Will any of the CHIPS funding trickle down to bare board fabrication? What process can be adjusted on the factory floor? The focus needs to be more than just on manufacturing and getting work out the door, he says, but also process control.
Designing Through Supply Chain Pain
Engineers are accustomed to the demanding challenges of designing for miniaturization, cost reduction, cross platform compatibility, and harsh environments. What has proven to be the most painful experience of my career (and for many of my colleagues) is the sheer lack of components from which to build our designs. Development cycles—commercial, industrial, medical, avionics—have been severely impacted, from large enterprise corporations to small design/integration companies. Awareness of the situation is the first step to understanding the underlying problems faced by today’s design engineers industry wide. Here are a few of the situations I have faced in the last year alone.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
It feels like the first day of school. It’s September, and we’re all officially back at our desks, workstations, or kitchen tables. Even Les Vacances is over. Oui, c’est vrai! But instead of facing new teachers, we have to deal with diverse market forces, supply chain issues, and technology that never seems to stop evolving. Of course, that’s what makes this industry so interesting, isn’t it?
A Deeper Look at the CHIPS Act Investment
In this interview with Chris Peters at U.S. Partnership for Assured Electronics (USPAE), Nolan Johnson seeks for better understanding regarding the implications of funding the CHIPS Act. Frankly, where and how will the $52 billion be spent? Who will decide how the funds are allocated? And surprisingly, who will benefit the most from this boost into the microelectronics industry?
IPC Advanced Packaging Symposium to Draw Industry, Government Representatives
Nolan Johnson speaks with IPC’s Chris Mitchell, vice president of global government relations, and Matt Kelly, chief technologist, about the inaugural IPC Advanced Packaging Symposium, scheduled for October 11-12, 2022 in Washington, DC. In this conversation, Mitchell and Kelly detail the symposium's objectives, presenters, and the value to both fabricators and assemblers in attending.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
There was some good news this week, as Republicans and Democrats managed to cooperate long enough to pass the CHIPS Act. Members of the House and Senate don’t usually act until they get worried about being voted out of office, so pardon me if I’m not ready to sing “Happy Days Are Here Again” just yet. But this is still really good news; the politicians are on the record now, and we can hold them accountable.
Excerpt: 'The Printed Circuit Designer’s Guide to... Thermal Management with Insulated Metal Substrates, Vol. 2'
As the second in this two-part series, The Printed Circuit Designer’s Guide to... Thermal Management with Insulated Metal Substrates, Volume 2, by Didier Mauve and Robert Art builds on the material presented in the first book by describing up-to-the-minute products and design techniques for thermal management with IMS.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
Our biggest news this week: I-Connect007 has been acquired by IPC. Every member of the team, including founder and Publisher Barry Matties, is included in this deal. We’ve enjoyed working closely with IPC for decades, especially at events like IPC APEX EXPO, and we have four IPC columnists writing in our magazines and newsletters. This move makes sense for both parties. It enables us to take our magazine, newsletters, and book publishing to the next level, and IPC won’t have to spend years building a media company from the ground up. It really is a win-win.
IPC Acquires Media Company I-Connect007, Strengthening Relationship to Drive Growth and Innovation in the Electronics Industry
IPC, a global electronics manufacturing industry association, has acquired media company I-Connect007, a global source for news and original content serving the printed circuit design, fabrication and assembly/EMS markets.
PCB Finance Class With Jeff De Serrano
Class is in session! PCB Technologies President Jeff De Serrano takes us through some of the struggles of the PCB industry over the past 30 years, how U.S. legislation seeks to level the playing field, and whether a “monopoly” of fabricators is healthy for our industry. In his chat with Nolan Johnson, Jeff gets out his investment playbook and talks strategy. Don’t miss this one.
FLEX Conference 2022: If You Build It, We Will Buy It
Key presentations from companies like Boeing highlight FLEX Conference and Exhibition 2022, held in concert with the annual SEMICON West show this week in San Francisco’s Moscone Center. SEMICON West claims to be “North America’s premier microelectronics exhibition and conference,” uniting players across the entire electronics manufacturing and design supply chain.
Time to Get Serious About CMMC Readiness
Divyash Patel of MX2 Technology is a leading cybersecurity expert who’s sounding the alarm about getting your company into a state of readiness. But he’s not yelling fire in a theater. Whether it’s aligning with DoD’s CMMC, or just ensuring your company’s data and processes are protected, Divyash can see what’s coming. “This is a must-have compliance program,” he says. “It needs to be taken seriously and maintained.”
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
In more than one conversation while discussing the industry this week, the themes have included industry turmoil, lots of business opportunities, and the urgent need to build out to meet changing demands. In fact, our July issue of PCB007 Magazine, which publishes later this month, will focus on these very topics. It’s definitely one not to be missed!
These themes also emerged in this week’s top five news items as well. Top stories include an acquisition in the soldering machinery space, sales and service expansion in Mexico, industry data from SIA on semiconductor global sales data, and strong financial numbers from two China-based manufacturers. Now, with the U.S. Congress putting its focus on the PCB industry, things could really heat up. It’s going to be an interesting year.
The U.S. Economy Needs the Bipartisan Innovation Act and the PCB Act
In this IPC-created interview between Dale Curtis, IPC Advocacy Communications and Chris Mitchell, IPC VP Global Government Relations, the importance of the semiconductor and PCB manufacturing legislation moving through US Congress is highlighted.
Ventec’s Book on Thermal Management: The Summer Sequel You’ve Been Waiting For
I-Connect007 is excited to announce the release of the second title in Ventec’s series on thermal management, "The Printed Circuit Designer’s Guide to… Thermal Management with Insulated Metal Substrates, Volume 2." This second volume covers the latest developments in the field of thermal management, particularly in insulated metal substrates, using state-of-the-art products as examples, and focusing on specific solutions and enhanced properties of IMS.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
Market news was certainly big this week. While the U.S. stock market continues make some large swings, the PCB and PCBA are doing their own dance with the numbers. We’re still feeling the effects of the pandemic, but it seems to be more about playing catch up. Still, the industry is showing some instability, both in positive and negative ways.
Review: Institute of Circuit Technology 2022 Annual Symposium
The British Motor Museum in Warwickshire, housing the world's largest collection of historic British cars, was venue for the 2022 Annual Symposium of the Institute of Circuit Technology on June 8, which attracted a substantial gathering of manufacturers and suppliers from the UK printed circuit industry. ICT chair Emma Hudson reflected upon lessons learned during the pandemic lock-down and how the industry has successfully adapted to circumstances. She commented that the UK’s PCB fabricators are extremely busy, as she introduced an outstanding conference programme including a keynote from the incomparable Happy Holden.
PCB Technologies' Subsidiary iNPACK to Exhibit at IMS Show
Jeff De Serrano, president of PCB Technologies USA, discusses the launch of their new company, iNPACK, which focuses on high-tech substrate technologies, microelectronics assembly, and electronics packaging. He details his plans to continue expanding InPack over the next year and to meet with customers and exhibit at the International Microwave Symposium Show in Denver June 19-24.
The Double-edged Sword of CMMC 2.0
For the past few years, those whose SMT provider organizations supply or contract with the U.S. Department of Defense (DoD) have been hearing about—or even gearing up for—implementation of the Cybersecurity Maturity Model Certification program, better known as CMMC. By this, I mean that you were gearing up for CMMC 1.0. Today, we have CMMC 2.0, and there are a number of changes in the new version that impact both the standards for compliance and how you certify that compliance—especially if you run a small business.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
Things are heating up in the world of PCB design and manufacturing as well. In the past week, we published quite a bit of news—some good, some not so good. Some of the news is mixed, as we see with the EMS industry shipments rising YOY in April, but falling from the previous month. It’s nice to see NASA investing in American small businesses, but they didn’t really have a choice, did they?
NASA Supports Small Business Research to Power Future Exploration
NASA has selected hundreds of small businesses and dozens of research institutions to develop technology to help drive the future of space exploration, ranging from novel sensors and electronics to new types of software and cutting-edge materials. The project, funded by NASA’s Small Business Technology Transfer program, could help improve the efficiency of solar cells for space missions and use on Earth.
Jahr Turchan Discusses Blackfox's Training Scholarships for Veterans
Nolan Johnson recently interviewed Jahr Turchan, director of Veteran Services & Advanced Manufacturing Programs for Blackfox Training Institute. They discussed some of the new programs at Blackfox, including the Veteran Advanced Manufacturing Certification program. Thanks to programs like these, this is a great time for veterans transitioning into the manufacturing workplace.
PCB Technologies’ InPack to Focus on Miniaturization, Packaging
I recently spoke with PCB Technologies’ Jeff De Serrano, Yaniv Maydar, and Alon Menache about their new venture, InPack. They explain their plans to focus on advanced packaging, miniaturization, and other high-end technology, with much faster time to market, and they offer a view of the global market as well.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
The big news in the industry this week was the new bill introduced to the U.S. Congress in support of the PCB manufacturing industry. The Supporting American Printed Circuit Boards Act of 2022, which was introduced by Reps. Anna Eshoo (D-CA) and Blake Moore (R-UT), incentivizes “purchases of domestically produced PCBs as well as industry investments in factories, equipment, workforce training, and research and development.” The bill is a PCB-oriented complement to the semiconductor-oriented CHIPS Act of 2021.
The Reality of Regulated Manufacturing
Nolan Johnson speaks with Ryan Bonner, CEO of DEFCERT, about government regulations for data and cybersecurity. A key component of moving to a digital factory will be to ensure security of the data required to operate a digital factory, and most importantly, customer design data.
Additive Design: Same Steps, Different Order
We recently spoke with Dave Torp, CEO of Winonics, about the company’s additive and semi-additive processes and what PCB designers need to know if they’re considering designing boards with these new technologies. As Dave explains, additive design is not much different from traditional design, but the steps in the design cycle are out of order, and additive designers must communicate with their fabricators because so much of the new processes are still proprietary.
Dave Hillman on Living Your Passion
Barry Matties leads this engaging retrospective conversation with Dave Hillman, a Fellow, Materials and Process engineer at Collins Aerospace, who talks about mentorship, pandemic changes, and solder. “Soldering is soldering,” Dave says. “But how we do that keeps evolving in response to the new technologies and smaller packages.” What’s the key to his success and longevity? “Find your passion.” Here’s how he’s done it.
DARPA Kicks Off Program to Explore Space-Based Manufacturing
DARPA’s Novel Orbital Moon Manufacturing, Materials, and Mass Efficient Design (NOM4D) program is underway with eight industry and university research teams on contract. The selected teams are tasked to provide foundational proofs of concept in materials science, manufacturing, and design technologies to enable production of future space structures on orbit without the volume constraints imposed by launch. All manufacturing would be done in orbital construction facilities and the results utilized in orbital applications.
Flexible Hybrid Electronics Design: Reducing Time to Market
Emerging innovations in the flexible hybrid electronics (FHE) domain are enabling new applications across multiple industries due to their highly flexible structures and additive manufacturing processes. The smaller form factor, lighter weight, and conformal capabilities are ideal for IoT edge devices in health and fitness monitoring, military asset identification and tracking, automotive displays and sensors, aerospace radar, and soft robotics. Significant industry research led by NextFlex is optimizing the processes from design through manufacture for FHE products.
José Servin Receives IPC Dieter Bergman Fellowship Award
The Dieter Bergman IPC Fellowship Award is given to individuals who have fostered a collaborative spirit, made significant contributions to standards development, and have consistently demonstrated a commitment to global standardization efforts and the electronics industry. José Servin has worked as an IPC member for more than 14 years in the development of the Electronics Assembly Norms. As a member of the IPC A-610 and J STD-001 working groups, he became chairman of IPC A-610G and J STD-001G Automotive Addendums that complements the norms for automotive industry since 2018.
Doug Pauls, Collins Aerospace, Receives Dieter Bergman IPC Fellowship Award
Doug Pauls holds a B.A. in chemistry and physics from Carthage College, Kenosha, Wisconsin, and a B.S. in electrical engineering from the University of Wisconsin, Madison. He worked nine years for the Navy, eight years as technical director of Contamination Studies Labs, and 19 years at Rockwell Collins (now Collins Aerospace), in the Advanced Operations Engineering group, where he is a principal materials and process engineer. Doug was awarded the Rockwell Collins Arthur A. Collins Engineer of the Year Award in 2004.
