Eagle Electronics Invests in Quality and Reliability with ATG A7a Flying Probe Tester
April 18, 2017 | Eagle ElectronicsEstimated reading time: 1 minute
Eagle Electronics has recently placed an order for a new ATG A7a automatic flying probe tester. The new tester will allow Eagle to test 100% of their boards via flying probe. The strategy is to utilize the new machine as the testing workhorse while their existing three Microcraft flying probe machines will primarily be used for retest and verification. The intent is to continue to test in panel form for most products. In automatic mode, the new machine will segregate good and bad boards automatically.
Some key features of the A7A include:
- fully automated test system for production and customized panel
- for lights out operation
- different type of products can be loaded in parallel
- biggest panel size 650 mm x 535 mm
- tension tools for automatic handling of flex boards down to 0.3 mm
The A7a machine also has the capability to test in Kalvin mode which can catch micro cracks and micro voids in small via structures through low ohm testing. This would not be the standard test, as it is considerably slower. However, on certain high layer count, HDI and high reliability boards it will be a beneficial capability. Delivery is expected late May.
President and CEO, Mike Kalaria stated, “As Eagle Electronics continues to grow at a rapid pace, it is important that we invest in our equipment and processes in order to meet the needs of our growing customer base. By implementing the A7a into our operations, we will not only increase the speed at which we are able to turn product, but it will also assure that everything we produce is top quality and free from any defects that could affect the customer’s final products.”
Delivery of the A7a is expected in late May in conjunction with the installation of two new Lenz drilling machines.
About Eagle Electronics
Since 1979, Eagle Electronics Inc. has provided our customers with the highest quality printed circuit boards at fair and competitive prices. From our modern 50,000 sq. ft. facility, we have been meeting and exceeding our customer's ever increasing expectations and requirements. From providing short standard lead times to very low premiums on quick turns we strive to provide the best total value in high technology rapid turn-around PCBs in the industry. Learn more at eagle-elec.com.
Suggested Items
Manta Ray UUV Prototype Completes In-Water Testing
05/02/2024 | DARPAThe Manta Ray prototype uncrewed underwater vehicle (UUV) built by performer Northrop Grumman completed full-scale, in-water testing off the coast of Southern California in February and March 2024.
Real Time with… IPC APEX EXPO 2024: Exploring Electronic Card Testing and AI Integration with SPEA
05/02/2024 | Real Time with...IPC APEX EXPOLuca Fanelli, president of SPEA, and vice president Andrea Furnari discuss the company and its business units. The challenges in testing electronic cards and SPEA's solutions are discussed, and its focus on the US market is emphasized. The use of AI in testing, particularly in optical inspection and test program execution, is also examined.
Boeing T-7A Red Hawk Triples Progress
05/01/2024 | BoeingThe Boeing T-7A Red Hawk achieved three recent milestones, propelling the advanced pilot trainer for the U.S. Air Force forward.
Keysight Secures New Test Case Validations for Narrowband Non-Terrestrial Networks Standard
04/30/2024 | Keysight TechnologiesKeysight Technologies, Inc. has validated new conformance test cases for 3rd Generation Partnership Project (3GPP) Release 17 (Rel-17) standards for non-terrestrial networks (NTN) using narrowband internet of things (NB-IoT) technology.
Latest Test and Inspection Solutions from GOEPEL electronic at SMTconnect 2024
04/29/2024 | GOEPEL electronicGOEPEL electronic will be demonstrating automated test and inspection equipment at SMTconnect, taking place in Nuremberg from June 11 to 13, 2024.