Arlon EMD and US Air Force Academy Establish CRADA
October 4, 2019 | Arlon EMDEstimated reading time: 2 minutes
Arlon EMD, a privately held, veteran owned, specialty laminate manufacturer has entered into an agreement with the United States Air Force Academy to collaborate efforts in researching and developing technology platforms for electronic materials, resin systems and copper-clad laminate products.
The Cooperative Research and Development Agreement (CRADA) between Arlon and the USAFA is a five-year program designed to offer cadets research opportunities in electronic materials science for practical applications in the electronics industry. Under this agreement the USAFA will provide Arlon additional resources for research in material science and resin technologies.
“We are excited to enter into this new relationship with the USAFA. As the only veteran owned, military and aerospace supplier of specialty copper clad laminates in N. America, working with our US Air Force Academy is a good fit. It is an honor to interact with such talented, academically-driven and skilled men and women of our United States Air Force,” stated Brad Foster, President of Arlon.
In this agreement, USAFA cadets will have academic opportunities to conduct research on various resin technologies under the direction of internationally recognized polymer expert Dr. Scott Iacono, Director of the Chemistry Research Center for the USAFA, Colorado Springs, Colorado. “Collaborating with an industrial partner such as Arlon to develop materials will give our cadets exposure to industrial applications of technologies through their independent study courses. We will research resin chemistries and technologies at our USAFA campus and then assist in developing these with Arlon,” commented Dr. Iacono.
About Arlon
Arlon EMD is veteran owned and privately held by CriticalPoint Capital (info@criticalpointcapital.com). Arlon EMD is a US manufacturer and distributor of specialty materials and has supplied specialty materials into the military, avionic, space, semiconductor and petroleum exploration markets for more than 25 years from their manufacturing location in Rancho Cucamonga, California.
For additional information, please visit our website at www.arlonemd.com or contact Deanna Bustamante, Marketing Manager, Deanna.Bustamante@ArlonEMD.com.
About USAFA
With a history of excellence and a focus on the future, the United States Air Force Academy instills cadets with pride and integrity while preparing them to serve their country and succeed in 21st-century careers. As a public university and a military service academy, the USAFA is leading the way into an increasingly complex future, driving advancement and innovation in air, space and cyberspace, among countless other fields. The USAFA has 24 research centers and institutes with emphasis in areas from warfighter effectiveness to high-performance computing. Research at the USAFA reflects the evolving needs of the Air Force in a technology-driven world. Specifically, the Chemistry Research Center (CRC) within the Department of Chemistry at the USAFA focuses on new chemical discoveries to meet operational AF and Department of Defense mission partner needs as well as private partnerships with academia and industry in order to leverage an expanding technology base.
For additional information, please visit our website at www.usafa.edu/research/research-centers/chemistry-research-center
Suggested Items
The Chemical Connection: Reducing Etch System Water Usage, Part 2
05/02/2024 | Don Ball -- Column: The Chemical ConnectionIn my last column, I reviewed some relatively simple ways to reduce water usage in existing etch systems: cutting down cooling coil water flow, adding chillers to replace plant water for cooling, lowering flow rate nozzles for rinses, etc. This month, I’ll continue with more ways to control water usage in your etcher. Most of these are not easily retrofittable to existing equipment but should be given serious consideration when new equipment is contemplated. With the right combination of add-ons, it is possible to bring the amount of water used in an etch system to almost zero.
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.