New Challenges Facing Mil/Aero Segment

Reading time ( words)

For this month's issue, we invited a sampling of professionals whose experience centers on the electronics industry in the military and aerospace world, including experts from design, PCB manufacturing, and the assembly arena to sit down with us for a frank discussion. Joining us were Freedom CAD’s COO Scott Miller; Lenthor Engineering VP of Sales/Engineering John Rolle and VP of Marketing Dave Moody; and Zentech’s CEO and President Matt Turpin and VP John Vaughan.

Our discussion centered on the challenges associated with military work, including the new regulatory requirements for cybersecurity, dealing with leaded vs. lead-free components, and the differences and similarities with the commercial world.

The discussion started on the PCB design perspective, whether the challenges are more technical or more centered on the administrative side, such as on regulations.

ScottMiller_FreedomCAD_Jul2017.jpg"I can tell you from our perspective, this year and going forward, the rules of engagement have really begun to change because of cybersecurity, and that’s having a huge impact on the engineering services community—how to comply with cybersecurity requirements that are now being mandated to us as external suppliers," explained Freedom CAD’s Miller. "It's something we’re spending a lot of time on. We’ve got work to do. We are ITAR-compliant, but cybersecurity compliance is a far deeper level of compliance than ITAR information management. That’s huge. We’re engaging with a consultant to help us understand how we can fulfill those requirements. And I think that’s going to be a game changer for a lot of the smaller companies that currently participate in the mil/aerospace marketplace, because there are some serious costs associated with cybersecurity management.

"It's a year-end objective. They want to have a supply base compliant, or at least have identified where the holes are, the weaknesses are, as far as we can tell, but there’s a huge impact. Assuming we overcome and address that, the other thing that has been kind of a mystery, and I’m sure everybody along the path sees this, is the defense budget, the DoD or Homeland Security, or whatever—any kind of government program—the defense budgets and understanding how the administrative change is going to slow down. Obviously, it looks like there’s going to be more spending in that area, but it’s not clear. Getting accurate forecast information or project information is difficult to do. We do our best to try to communicate with the customer and the subcontractor, etc., but they can only tell you so much because they only know so much."

Miller said that as the device types continue to get smaller and pin pitches get tighter, meeting traditional Class 3 requirements becomes increasingly difficult. "You can't meet Class 3 in certain applications, so you're consistently asking for a deviation or a waiver. Just because of the physics involved, you just can’t physically meet Class 3 in some cases. And if it's a rigid requirement, then you have to work with the customer’s engineers to fit the components that will allow you to meet that. From the standpoint of technology and architecture, we do things that are just as challenging in mil/aerospace, with fine lines and impedance matching, etc., that drive the consumer commercial world as well. From a technology standpoint, I don't think there's that big a gap in terms of what we’re seeing as design requirements. It’s been interesting to see how the government and the IRAD product development drives a lot of new technology as the government subcontractors try to figure out how to do things to differentiate their capabilities, and that kind of flows into the consumer world eventually, and vice versa; the commercial consumer world is developing technologies that are now being adopted readily in the mil/aerospace."

Lenthor's Moody next explained the challenges from a PCB fabricator's viewpoint. "There are a couple, though John might have some different perspectives from an engineering standpoint. The requirements in the mil/aero defense industry are mirroring what is available everywhere else. The perception that there are cost advantages or margin advantages for fabricators to work in the military industry are going away and have been disappearing for quite some time. There's a demand from a business standpoint on their end to buy more smartly—and better. So, the days where everybody thought, 'I'm going to participate in this military business because I can make more money at it' are kind of gone. There is a protection, to some degree, for the domestic fabricators because of ITAR content, so that remains as a competitive advantage on the business side for companies, domestically, who are trying to do business in this industry. But it is from the other aspects, such as design requirements, delivery requirements, etc."

JohnRolle_LenthorEngineering.jpgRolle added, "It's certainly challenging from a business perspective, because the expectation is to be competitive and then to continue to reduce that pricing. At the macro level, more dollars are being spent all the time. I'll build off what you were talking about earlier. Will it play down even to the fab level, where even if you’re successfully participating in a contract with really good schedule performance and very low defects, the expectation is that costs will reduce if you want to entertain the next bid on the contract? I think in some cases those contracts are summarily rejected if you came back to the same price. So, I think that’s the challenge. I don’t know that it is different from other large programs in other industries. However, I just want to add on to what Dave was saying, that our experience has been a difficult one.

According to Rolle, another challenge when it comes to engineering and tooling perspective are the drawings with existing requirements. "You're trying to comply with the drawing and you’ll have situations, like you were mentioning. You have to get a waiver, to do something differently, or something’s very cost-prohibitive due to an impact to yields. Getting changes through is always one of the supreme challenges. Even in cases where you provide a good service and your customer agrees to what you're requesting, often there’s no funding in the program to pay for your engineering change. We’ve come across that recently where we all agree with this, it makes a lot of sense, and it’s going to help you reduce costs, but nobody’s going to pay you any money to fix that. Or cases where it does go through, but the length of time it takes to go through automatically puts the entire program on schedule jeopardy and puts immense pressure on the entire supply chain to perform to levels that maybe are unreasonable or difficult to come out looking good, when really you were just trying to do the right thing and build to print or reduce costs," he said. "Those are some challenges as well. I've seen many cases where jobs go on hold for three months, and then of course everyone needs it tomorrow. And I certainly understand that, no matter who that customer is. Everyone is making a product, and we’re all feeding upwards towards some goal, and you can’t recover that lost time. I’d say to Dave’s point, there are certainly business challenges with that. I think change management, where it changes, and their impact on the overall schedule is also a challenge that’s worth noting."

MattTurpin_Zentech_Jul2017.jpgFrom an EMS standpoint, Zentech's Turpin also mentioned the need to comply with the new cybersecurity rules. "The NIST 800-171 guidelines are complex. It’s night and day. ITAR is really nothing compared to the cyber rules. Complying with ITAR would be maybe a three, and to comply with the NIST 800-171 is more like an 83. It’s orders of magnitude more complex and we’ve been working on it, and we already had a head start. We started about three years ago down this path, but the NIST 800-171 is formidable and it’s being driven at us as flowdowns from all the military primes. Fortunately, it doesn’t have to kick in now, but soon everybody is going to have to do it," he said. "To the earlier point about the military being more commercial in terms of pricing, this NIST 800-171 is going to be an unbelievable barrier to entry. I don’t know how a lot of people are going to have the infrastructure and the capability to comply with it. They’re either going to have to close their eyes when they self-certify, or they’re just going to be completely non-compliant and hope it will go away. NIST 800-171 is huge, and I'm surprised a lot of people aren’t talking about it yet. That will be a big challenge. We’re doing pretty good. We should be compliant before the end of this year."

Regarding how long it takes to go through that compliance process, Turpin said it depends on how mature the organization is. "For us, we currently have only two sites, and we’re getting ready to add a third. If you are a multi-site organization, or you’ve got the challenge that Scott does in terms of kind of a virtual organization, it’s unbelievably difficult because very specific hardware issues must be dealt with. I can’t even begin to talk about it. I mean, I’ve got a whole team that’s dealing just with this compliance."

But isn’t this industry over-regulated already? Absolutely not, according to Turpin. He said that there is such a disparity in terms of the due diligence the companies in the mil/aerospace undertake, and it's absolutely needed. "What a lot of companies do that I’ve seen, that we’ve audited, it’s almost criminal the lack of protections they have, relative to firewall, file security, data security, who they send files to, how they store stuff. It’s absolutely needed," he stressed.

To read the full version of this article, which appeared in the July 2017 issue of SMT Magazine, click here.


Suggested Items

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

01/20/2023 | Andy Shaughnessy, Design007 Magazine
We’re in the middle of show season, and it certainly “shows.” Thank you very much. I’m here all week. Don’t forget to tip your wait staff. This week, we published a variety of articles, columns, and news items, and much of it centered on trade shows. Technical Editor Dan Feinberg brings us a report from CES 2023. IPC announced the winners of the Best Technical Paper awards for IPC APEX EXPO 2023. And we have an interview with Altium’s Rea Callender about the company’s educational efforts at APEX and around the globe.

Polar Instruments: Simulating PCB Potentialities

12/08/2022 | Nolan Johnson, I-Connect007
Nolan Johnson checks in with Polar’s Martyn Gaudion on the evolving needs of global PCB manufacturing markets in a post-pandemic world, where generating accurate PCB specification documentation is essential to successfully navigating today's rampant supply chain constraints. Polar has positioned itself to meet these needs through agile software product developments that allow OEMs and fabricators to simulate material interactions and end-product specifications, including in-demand features like a comprehensive "structure view" that allows users to visualize all the transmission lines on a given a PCB. Though keeping pace with the demands of a rapidly growing industry has been challenging, Polar's commitment to innovation has kept its software suite ahead of the curve.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

06/17/2022 | Andy Shaughnessy, Design007 Magazine
We’re still not officially into summer yet, but Atlanta is bringing the heat, baby! It’s hit 97 degrees a few times this week, and I now have a fan aimed right at my face. At least it’s nice and humid too. I’m glad I don’t wear make-up. And it’s been a hot week in the circuit board community. This week, Eltek reported a fire at a board shop in Israel, and Flex committed to building a 145,000-square-foor facility in Jalisco, Mexico to serve the electric and autonomous vehicle segment.

Copyright © 2023 I-Connect007 | IPC Publishing Group Inc. All rights reserved.