L3Harris Technologies Demonstrates Antenna Technology for US Space Force Satellite Communications
January 13, 2021 | Business WireEstimated reading time: 1 minute
L3Harris Technologies has successfully completed a technology demonstration, under a Defense Innovation Unit prototype contract, for the U.S. Space Force satellite communication system to improve communications with the agency’s growing number of satellites.
L3Harris developed a Multi-Band Multi-Mission (MBMM) phased array ground antenna system and integrated it with the Space Force’s Satellite Communication Network system in order to demonstrate multiple simultaneous satellite contacts. Traditional parabolic or radio antennas can contact only one satellite at a time.
The MBMM system’s all-digital architecture established 16 simultaneous contacts during the demonstration. The system can scale up to support hundreds of concurrent satellite connections from a single phased array antenna system, reducing the physical footprint needed for ground antennas and lowering the infrastructure cost per satellite contact.
“L3Harris developed an all-digital phased array antenna technology to meet the enormous ground system capacity demands created by the increasing number of satellite missions,” said Ed Zoiss, President, Space and Airborne Systems, L3Harris. “This successful demonstration from L3Harris readies our nation with a capable and affordable advanced satellite communications approach today for the further proliferation of satellites in the near future."
The L3Harris demonstration successfully confirmed live contacts with Space Force satellites across multiple orbital regimes at Schriever Air Force Base in Colorado.
“The MBMM demonstrations were a complete success that showcased the advancements in phased array technology and relevance for satellite command and control with live DOD systems. It has reinvigorated interest in the MBMM program as a key part of the overall space architecture,” said Col. Wallace “Rhett” Turnbull III, Director, Cross Mission Ground and Communications Enterprise, Space and Missile Systems Center. “Capabilities like those recently demonstrated may play an important role in meeting the growing demand for satellite control capacity by providing more affordable and resilient access to Space Force satellite systems.”
L3Harris performed the successful demonstration with support from Kratos Defense & Security Solutions, Inc. and Mercury Systems.
Suggested Items
Lockheed Martin Australia, The Department Of Defence Sign Strategic Partnership Head Contract
04/26/2024 | Lockheed MartinLockheed Martin Australia signed a landmark AUD$500 million contract with the Department of Defence to build Australia’s future Joint Air Battle Management System under project - AIR6500 Phase 1 (AIR6500-1).
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Siemens’ Breakthrough Veloce CS Transforms Emulation and Prototyping with Three Novel Products
04/24/2024 | Siemens Digital Industries SoftwareSiemens Digital Industries Software launched the Veloce™ CS hardware-assisted verification and validation system. In a first for the EDA (Electronic Design Automation) industry, Veloce CS incorporates hardware emulation, enterprise prototyping and software prototyping and is built on two highly advanced integrated circuits (ICs) – Siemens’ new, purpose-built Crystal accelerator chip for emulation and the AMD Versal™ Premium VP1902 FPGA adaptive SoC (System-on-a-chip) for enterprise and software prototyping.
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.
Vicor Power Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/24/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that Vicor Power has finalized the purchase of a Pulsar solderability testing system.